ENGINE ELECTRICAL
6D-45
FIELD
FRAME
(GROU
2424
Fig. 6D-52 Testing Field Coils For Ground
Fig. 6D-53 Testing Field Coils For Open
b. Place the snap ring on the end of the shaft. With a
piece of wood on top, force the ring over the shaft with a light
hammer blow (Fig.
6 D - 5 5 ) ,
then slide the ring down into the
groove.
V O L T M E T E R
B A T T E R Y
u
Fig. 6D-54 Connections For Checking Solenoid
d. Remove the washer.
e. Assemble collar over shaft.
2. Refer to the disassembly procedure and follow in
reverse to complete the reassembly.
3. When the solenoid is reinstalled, apply sealing
compound between field frame, flange, and solenoid junction.
c. To force the retainer over the snap ring, place a
suitable washer over the shaft and squeeze retainer and
washer together with pliers (Fig.
6 D - 5 6 ) .