Universal Joint Repair Kit-H And X Series; Propeller Shaft Specifications; Tightening Specifications - Pontiac TRANS AM 1977 Service Manual

PROPELLER SHAFT 4A- 13
Spider
Fig. 4A-2 1 Universal Joint Repair Kit
-
H and X Series
SPECIFICATIONS
TORQUE
PROPELLER SHAFT SPECIFICATIONS
Rear U-Joint to Pinion Flange
LB. FT.
A, B and X Series
.........................................................
15
Tightening Specifications
Rear U-Joint to Pinion Flange
..........................................................................
Use a reliable torque wrench to tighten the parts listed
H Series 15
to insure proper tightening without straining or distorting
parts. These specifications are for clean and lightly-lubricated
SPECIAL TOOLS
threads only; dry or dirty threads produce increased friction
....................................................................
which prevents accurate measurement of tightness.
J 8853 Base Plate
....................................................................
J 9522-2 Adaptor
...............................................................
J 9522-3 Cross Press
J 9522-7
........................................................................
Guide
.....................................
J 23498 Inclinometer (or J 22910-01
may be used)