Table of Contents
Advertisement
TURBO HYDRA-MATIC 200
Fig. 7A1-23 Removing Control Valve Assembly From
Case
Fig. 7A1-26 Removing Governor Cover Retaining Ring
Fig. 7A1-24 Removing 1-2 Accumulator Spring
Fig. 7 A l - 2 7 Removing Governor Cover
Fig. 7A1-28 Removing Intermediate Servo Retaining Ring
Fig. 7A1-25 Removing 5th Check Ball
c. Remove intermediate servo
is ton
and band amlv
..
-
(Fig. 7A1-30).
NOTE: If intermediate servo cover and seal assembly
can not be removed easily, place shop towels and hand
over cover and case. Apply air pressure into the direct
clutch assumulator port, (Figs. 7A1-31 and 32).
Advertisement
Table of Contents
