Table of Contents
Advertisement
6 F-4
1977 PONTIAC SERVICE MANUAL
Fig. 6F-8 Catalyst Container
BRIDGE
Fig. 6F-9 Service Fill Plug
12.
Start car and check for leaks.
BOTTOM COVER
If, for any reason, the bottom cover of the converter is
torn or damaged, it can be replaced with a repair kit.
Replacement
1.
Remove bottom cover by cutting close to the bottom
outside edge (Fig.
6F-13).
Do not remove the fill plug. The
depth of the cut must be very shallow to prevent damage to
the inner shell of the converter.
Fig. 6F-10 Bridge Positioning
Fig. 6F-1 1 Service Fill Plug Installation
Fig. 6F-12 Torque Fill Plug
2.
Remove insulation.
3.
Inspect inner shell of the converter for damage. If
there is damage in the inner shell, the converter assembly
must be replaced.
4.
Place new insulation in the replacement cover. Apply
sealing compound,
8998245
or equivalent, all around the
Advertisement
Table of Contents
