Direct Clutch Housing Assembly - Pontiac TRANS AM 1977 Service Manual

7A1-54 1 9 7 7 PONTIAC SERVICE MANUAL
Fig. 7 A 1-1 14 Location of Front Selective Washer
Fig. 7A1-1 1 3 Checking Rear Unit End Play
REAR UNlT END PLAY WASHER
THICKNESS CHART
THICKNESS IDENTIFICATION
Number and/or Color
1 Orange
2 White
3 Yellow
4 Blue
5 Red
6 Brown
7 Green
8 Black
9 Purple
FRONT UNlT PARTS
Direct Clutch Housing Assembly (Fig. 7A1-115)
1. Remove snap ring. (Fig. 7A 1-7- 1 16)
2. Remove the clutch backing plate from the direct
clutch housing.
3. Remove the clutch plates from the direct clutch
housing and keep them separated from the forward clutch
plates (See Clutch Plate Usage Chart, Fig. 7A1-98B).
4. Inspect composition-faced plates and steel clutch
plates for wear or burning.
5. Inspect clutch backing plate for scoring or other
damage.
6. Using J 23327, compress retainer and spring assembly
(Fig. 7A 1
-
1 17), remove snap ring and inspect for damage or
distortion.
7. Remove J 23327.