Power Steering Gear (Exploded); Mounting Steering Gear In Vise; Removing End Cover - Pontiac TRANS AM 1977 Service Manual

3 B 3-6
1977 PONTIAC SERVICE MANUAL
PITMAN SHAFT
INVERTED FLARE
ADJUSTER PLW;
LOCK NUT
3910
Fig. 383-8 Power Steering Gear (Exploded)
I
Fig.
383-9
Mounting Steering Gear in Vise
Assembly
1 . If the needle bearing was removed, place new needle
bearing over Tool 5-6221, with the bearing manufacturer's
identification against the tool, and drive the bearing into the
adjuster plug until it is flush with the surface of seal bore (Fig.
3B3-18).
Fig.
383-10
Removing End Cover
CAUTION: Place a block of wood under the
adjuster plug to protect it during driving of the
bearing.