Page 2
This Customer Assistance Information section tells you how to contact Pontiac for assistance and how to get service and owner publications. This gives you information on “Reporting Safety Defects” on page...
“General Motors of Canada Limited” for Pontiac Division whenever it appears in this manual. Please keep this manual in your Pontiac, so it will be there if you ever need it when you’re on the road. If you sell the vehicle, please leave this manual in it so the new owner can use it.
How to Use this Manual Many people read their owner’s manual from beginning to end when they first receive their new vehicle. If you do this, it will help you learn about the features and controls for your vehicle. In this manual, you’ll find that pictures and words work together to explain things quickly.
Vehicle Damage Warnings Also, in this book you will find these notices: NOTICE: These mean there is something that could damage your vehicle. In the notice area, we tell you about something that can damage your vehicle. Many times, this damage would not be covered by your warranty, and it could be costly.
Page 6
Vehicle Symbols These are some the symbols you may For example, These symbols these symbols are important used on an for you and original battery: your passengers whenever your vehicle is CAUTION driven: POSSIBLE INJURY DOOR LOCK PROTECT UNLOCK EYES BY SHIELDING CAUSTIC FASTEN...
Section 1 Seats and Restraint Systems Here you’ll find information about the seats in your Pontiac and how to use your safety belts properly. some learn about things you should Seats and Controls Manual Seats Power Seats Folding Driver’s Seatback...
Seats and Seat Controls This section tells you about the seats them, take them out, put them back in, and fold & unfold them. Driver’s 4-way Manual Seat Use the lever on the front left side of the seat to adjust the seat forward or backward.
Page 10
6-Way Power Seat (Option) To adjust the six-way power seat: Front Control (A): Raise the front of the seat by holding the switch up. Hold the switch down to lower the front of the seat. Center Control (B): Move the seat forward or backward by holding the control to the front or back.
Manual Front Seats unlock it. Slide the seat to where want it. seat is locked into place, release the lever and try to your body. move the seat with Reclining Front and Captain’s Chair Seatbacks All front seats recline. To make sure the adjust seatback,...
Page 12
But don’t have a seatback reclined if your vehicle is moving. CAUTION: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can’t do their job when you’re reclined like this. The shoulder belt can’t do its job because it won’t be against your body.
Manual Lumbar Control Turn the knob on the outboard side seat tu adjust the lower back support. Head Restraints Slide the head restraint up or down so that the top of restraint is closest to the top of your reduces the chance of neck injury in a crash.
Second Row Safety Belt Stowage your vehicle has seats in the third row, there is a sleeve on the second row outside safety belt to store the safety belt while entering and exiting the third row of the vehicle. If your vehicle has a bench seat in the second row, follow this procedure: h l l the belt out and slide the sleeve along the belt until it reaches the patch of Velcro@ on the roof.
Page 15
Solid Bench Seat If you have a solid bench seat, the seatback can be folded down. The seat can also be folded forward or removed to provide extra storage space. 'Second Row Solid Bench Seats Folding the Seatback fold down the seatback, pull the nylon strap on the back To raise the seatback, pull the nylon strap on the back of...
Page 16
2. From behind the bench seat, pull the nylon strap at the base the seat to release the rear latches from the floor pins. 3. Do not let go of the straps until the seat is folded all the way forward. Unhook the front latches by rolling handle under the seat until the handle locks.
Page 17
5. Remove rocking it slightly towards the rear of the vehicle and then pulling it out. This should be done in one motion. Replacing the Second Row Solid Bench Seat Don’t put the bench seat in so it faces backward because it won’t latch that way.
Page 18
3. If the front legs are not attached correctly, the rear 4. Firmly push the rear hooks into the rear floor pins by legs will not attach to the rear set of pins. floor pushing down on the the seat. rear of Try to raise the bench seat to check that it is locked down.
Page 19
CAUTION: seat that isn’t locked into place properly can move around i n a collision or sudden stop. People the vehicle could be injured. the seat into place properly when installing it. 6. Pull nylon strap on the back the seatback until it locks upright.
Page 20
Third Row Solid Bench Seats Folding the Seatback To fold down the seatback, pull the nylon strap on the back of the seat. To raise the seatback, pull the nylon strap while raising the seatback until it locks upright. Push and pull on the seatback to check that it is locked. Adjusting the Third Row Solid Bench Seat 1-13...
Page 21
There are two levers to adjust the seat forward or rearward. They are below the center position of the bench, one in front and one in back Lift up either lever and slide the seat forward to for extra storage behind the seat, or slide the seat back to allow extra room for third row passengers.
Page 22
5. Unhook the front latches by rolling up the gray Remove the seat by handle under the seat until the handle locks. rocking it slightly towards the rear of the vehicle and then pulling it out. This should be done in one motion. 1-15...
Page 23
Replacing the Third Row Solid Bench Seat Don’t put the bench seat in so it faces backward because won’t latch that way. If you want more storage room behind the seat, adjust the seat by sliding it forward. The solid benches have seat position labels, located on the back of the seat, showing where the Follow that diagram.
Page 24
the front legs are not attached correctly, the rear 3. If legs will not attach to the rear set of floor pins. the front latches are not attaching correctly, check that the seat is in the full rear position. 5. Firmly push the rear hooks into the rear floor pins by pushing down on the rear of the seat.
CAUTION: move around in a collision or sudden stop. People the vehicle could be injured. Be sure the seat into place properly when installing Pull the nylon strap on the back the seatback until it locks upright. 8. Push and pull on the seatback to check that it is locked place.
Page 26
To raise either seatback, pull the nylon strap of the seat while raising the seatback until it locks upright. h s h and pull on the seatback to check that it is locked upright. Adjusting the Split Bench Seats back There are two adjustment levers on each section of the split bench seats to adjust the seat forward or rearward.
Page 27
Lift up either lever and slide the seat forward to allow for extra storage behind the seat, or slide the seat back to allow extra room for passengers. Release the lever. Push m d pull on the seat to be sure it is locked into place.
Page 28
3. From behind the bench seat, pull the nylon strap at the seat to release the rear latches from the base the floor pins. 4. Do not let go of the straps until the seat is folded all the way forward. 5.
Page 29
Remove the seat by rocking it slightly towards the rear of the vehicle and then pulling it out. Repeat Steps 1 through 5 for other section split bench seat. 1-22 Replacing the Split Bench Sections Don’t sections backward because they won’t latch that way. If more storage room behind the seat, adjust each section by sliding it forward The split benches have seat position labels, located on...
Page 30
Make sure the seat in the full rear position before beginning this procedure. 1. Squeeze the angled gray bar towards the solid gray crossbar while placing the front hooks of the bench seat onto the front two floor pins. To do this, the bench seat will need to be angled that the...
Page 31
3. If the front legs are not attached correctly, the rear legs will not attach to the rear set of floor pins. 1-24 4. If the front latches not attaching correctly, check that the seat is in the full rear position. 5.
Page 32
CAUTION: seat that isn’t locked into place properly can move around in a collision or sudden stop. People in the vehicle could be injured. Be sure to lock the seat into place properly when installing it. 7. Lift the seatback recliner lever or pull the nylon strap on the back of the seat and raise locks upright.
Bucket Seats There are three types of rear bucket seats: RIGHT ONLY, LEFT and LEFT ONLY. CENTER OR RIGHT ONLY and LEFT ONLY seats may be equipped with the built-in child restraint option. The rear bucket seats can be removed to provide extra storage.
Adjusting the Bucket Seats There are two adjustment levers on each seat to adjust the seat forward or rearward. They are located below the center, one in front and one in back of the seat. Lift up either lever and slide the allow for extra storage behind the seat, or slide the...
Page 35
Removing the Bucket Seats Make sure the seatback is in the upright position. restraints head should be fully down. 1. Lift the seatback recliner lever or pull the nylon strap on the back of the seat to fold the seatback forward. 2.
Page 36
5. To unlatch the front latches, with the seat folded forward, squeeze the angled latch release bar towards the straight crossbar. 6. Remove the seat by rocking it slightly towards the rear of the vehicle and then pulling it out. This should be done in one motion.
Page 37
Replacing the Bucket Seats in so Don’t put the seats they face backward because they won’t latch that way. If you want more storage room behind the seat, adjust the seat by sliding it forward. The bucket seats have seat position labels, located back of the seat, showing where the seat must go.
Page 38
3. If the front legs are not attached correctly, the rear legs will not attach to the rear set of floor pins. 4. If the front latches are not attaching correctly, check that the seat is in the full rear position. 5 .
Page 39
A seat that isn’t locked into place properly can move around in a collision or sudden stop. People in the vehicle could be injured. Be sure to lock the seat into place properly when installing it. 7. Lift the seatback recliner lever or pull the nylon strap on the back of the seat and raise the seatback until it locks upright.
Page 40
2. The seat can then be lifted off the front floor pins Removing the Captain’s Chairs and removed from the vehicle. 1. Pull the nylon strap behind the chair to release the rear hooks from the floor pins. 1-33...
Page 41
Replacing the Captain's Chairs A and C The left chair goes in the D and F sets The right chair goes 1. Hook the front latches over the front floor pins. 1-34 2. Push onto the rear set of floor pins. sets of floor pins.
Safety Belts: They’re for Everyone This part the manual tells you properly. It also tells you some things you should not do with safety belts. And it explains the Supplemental Restraint System (SRS), a i r bag system. CAUTION: Don’t let anyone ride where he or she can’t wear a safety belt properly.
Your vehicle has a light that comes on as a reminder to buckle up. (See “Safety Belt Reminder Light” in the Index.) In most states’and Canadian provinces, the law says to wear safety belts. Here’s why: They work. You never know if you’ll be in a crash. If you do have a crash, you don’t know if it will be A few crashes are mild, and some crashes can be so serious that even buckled up a person wouldn’t survive.
Page 44
Get it up to speed. Then the vehicle. The rider Put someone on it. stop doesn’t stop. 1-37...
Page 45
The person keeps going until stopped by something. In a real vehicle, it could be the windshield 1-38 or the instrument panel...
or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That’s why safety belts make such good sense. Here Are Questions Many People Ask About Safety Belts and the Answers...
And there are different rules for smaller children and babies. in your Pontiac, see the part of this manual called “Children.” Follow those rules for everyone’s protection. First, you’ll want to know which restraint systems your vehicle has.
Page 48
The shoulder belt may lock if you pull the belt across you very quickly. this happens, let the belt back slightly to unlock it. Then pull the belt across you more slowly. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make sure it is secure.
Page 49
5. To make the lap part tight, pull down on the buckle end of the belt as you pull up on the shoulder belt. 1-42 The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones.
Page 50
Shoulder Belt Height Adjuster Before you begin to drive, move the shoulder belt adjuster to the height that is right for you. To move it down, push down on the button and move the height adjuster to the desired position. You can move the adjuster up just by pushing up on the shoulder belt guide.
Page 51
What's wrong with this? The shoulder belt is too loose. It won't give nearly much protection this way. 1-44 CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body.
Page 52
&: What’s wrong with this? The belt is buckled in the wrong place. You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones.
Page 53
What’s wrong with this? CAUTION: You can be seriously injured if your belt goes an armrest this. over like The belt would be much too high. In wash, you can slide under the belt. The belt force would then be applied at the abdomen, not at the pelvic bones, and that could cause serious or fatal injuries.
Page 54
What’s wrong with this? The shoulder belt is worn under the arm. It should be worn over the shoulder at all times. ‘CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury.
Page 55
What’s wrong with this? You can be seriously injured by a twisted belt. In a crash, you wouldn’t have the f u l l width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask to fix it.
To unlatch the belt, just push the button on the buckle. The belt should go back out of the way. Before you close the door, be sure the belt is out of the slam the you can damage both the way.
Supplemental Restraint System (SRS) This part explains the Supplemental Restraint System (SRS) or air bag system. Your Pontiac has two bags one air bag for the driver and another bag for the right front passenger. Here are the most important things to know about the air...
CAUTION: Air bags inflate with great force, faster than the blink of an eye. If you’re too close to an inflating air bag, it could seriously injure you. Safety belts help keep you in position before and during wear crash. Always your safety belt, even with air bags.
How the Air Bag System Works The right front passenger’s a i r bag is in the instrument panel on the passenger’s side. Where are the air bags? The driver’s a i r bag is in the steering wheel. middle 1-52...
Page 60
If something is between an occupant and an air bag, the bag might not inflate properly or it might force the object into you and cause injury. The path of an inflating air bag must be kept clear. Don’t put anything between an occupant and an air bag, and don’t attach on the steering wheel hub or on or near any air bag cover.
Page 61
How does an air bag restrain? moderate to severe fiontal or near-frontal collisions, even belted occupants can c-mtact the steering wheel instrument panel. bags supplement the protection A i r bags distribute the force of provided by safety belts. the impact more evenly over the occupant’s upper body, stopping the occupant more gradually.
Page 62
Do not open or break the air bag covers. Servicing Your Air bags affect how your Pontiac should be serviced. There are parts of the air bag system in several places around your vehicle. You don’t want the system to inflate while someone is working on your vehicle.
Rear Seat Passengers rear seat passengers to buckle up! It’s very important Accident statistics show that unbelted people seat are hurt more often in crashes than those who are wearing safety belts. Rear passengers who aren’t safety belted can the vehicle in a crash. And they can strike others in the vehicle who wearing safety belts.
Page 64
Lap-Shoulder Belt The positions next to the windows have lap-shoulder belts. Here’s how to wear one properly. 1. Pick up the latch plate and pull the belt across you. Don’t let it get twisted. The shoulder belt may lock if you pull the belt across very quickly.
Page 65
3. To make the lap part tight, pull down on the buckle end of the belt as you pull up 1-58 The lap part of the belt should be worn low and snug on the shoulder part. the hips, just touching force to the strong pelvic bones.
Page 66
The safety belt locks there’s a sudden stop or a crash, or if you pull the belt very quickly out of the retractor. CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which couldmincrease injury.
Rear Safety Belt Comfort Guides for Children and Small Adults Your vehicle may have rear shoulder belt comfort guides. This feature will provide added safety belt c01nf0rt for children who have outgrown child restraints for small adults. When installed on a shoulder belt, the comfort guide pulls the belt away from the neck and head.
Page 68
3. Be sure that the belt is not twisted and it lies flat. The guide must be on top of the belt. 4. Buckle, position and release the safety belt as described in “Rear Seat Outside Passenger Positions” earlier in this section. Make sure that the shoulder belt crosses the shoulder.
Center Passenger Position (Bench Seat) Lap Belt If your vehicle has a third row rear bench seat, someone center position. 1-62 When you sit in the center position of the bench seat, you have a lap safety belt, which has no retractor. To make the belt longer, tilt the latch the belt.
To make the belt shorter, pull its free end as shown until the belt is snug. Buckle, position and release it the same way as the lap part of a lap-shoulder belt. If the belt isn’t long enough, see “Safety Belt Extender” at the end of this section. Make sure the release button on the buckle so you would be able to unbuckle the safety belt quickly if you...
Page 71
When you sit in the center position bucket seat, have a lap safety belt which has a retractor. 1. Pick up the latch plate and, in a single motion, pull the belt across you. Don’t let 2. Push the latch plate into the buckle until it clicks. If the belt stops before it reaches the buckle, let it go back all the and start again.
CENTER TO HELP AVOID PERSONAL INJURY, SECURELY LATCH SEAT IN LOCATION SHOWN OWNER’S MANUAL FOR ONLY MORE INFORMATION. Seat Location Printed in: The center position bucket seat is a CENTER OR LEFT type seat. Because it is the only bucket seat with a lap belt, and has a buckle on only one side, there are certain places a CENTER OR LEFT type bucket seat should, and should not, be used.
Page 73
Never hold a baby i n your arms while riding i n a vehicle. A baby doesn’t weigh much crash. During a crash a baby will become so CAUTION: (Continued) 1-66 heavy you can’t at only 25 mph (40 M), a 12-lb. (5.5 kg) baby suddenly become a 2404b.
Built-in Child Restraint (Option) If your vehicle has this option in a bucket seat, each bucket seat that has the built-in child restraint fits only one location in your vehicle. To find out where a bucket seat that has a built-in child restraint must located in your vehicle, see “Removable Rear Bucket Seats”...
Page 75
This child restraint system conforms Federal Motor Vehicle Safety Standards. Each child restraint is designed for use only by children weigh between 22 and 40 pounds and whose height is between 33.5 and 40 inches (850 and 1 0 16 k m ) and who are capable of sitting upright alone.
Page 76
Child in the Built-In Securing Child Restraint 2. Rotate the head restraint until it touches the rearward top of the seatback. Make sure there is no gap between the lower edge of the head restraint the top of the seatback. 1.
Page 77
You’ll be using the child restraint’s harness (A) to 3. Lower the child restraint cushion. secure your child Don’t use the vehicle’s safety belts. 1-70...
Page 78
CAUTION: Using the vehicle’s regular safety belts on a child seated on the child restraint cushion can cause serious injury to the child in a sudden stop or crash. If a child is the proper size child restraint, secure the child using the child restraint’s harness.
Page 79
Be sure the buckle is free may prevent you from securing the latch plates. If you can’t secure a latch plate, see your Pontiac dealer for service before using the child restraint. 1-72 8. Place the other side of the child’s shoulder.
Page 80
11. Now fasten the left and right halves of the shoulder harness clip together. The purpose of this clip is to help keep the harness positioned on the child’s shoulders. An unfastened shoulder harness clip won’t help keep the harness in place on the If the harness isn’t on the child’s shoulders, it won’t be able to restrain the child’s upper body sudden stop or crash.
Page 81
12. Pull the shoulder harness adjustment strap (C) firmly until the harness snugly adjusted around the chrld. YOU should not be able to put more than fingers between the harness and the child’s chest. Make sure the harness and buckle strap are not twisted.
Page 82
Removing the Child from the Built-In Child Restraint 1. Unfasten the shoulder harness clip. 2. Unlatch the harness by pushing the button on the buckle. 3. Move one side of the harness off the child’s shoulder. 4. Move the other side of the harness off the child’s shoulder.
Storing the Built-In Child Restraint Always properly store the built-in child restraint before using the vehicle’s lap-shoulder belt. both 1. Move both latch plates and harness clip to the bottom the harness straps. 1-76 2. Fold the child restraint cushion and leg rest up into the scatback, 3.
Page 84
4. Then press the leg rest firmly into the seatback, and secure it by pressing the upper corners against the fastener strips on the seatback. Rotate the head restraint forward and push it all the way down. Just like the other restraint systems in your vehicle, your built-in child restraint needs to be periodically checked and may need to have parts replaced after a crash.
Child Restraints is designed sure the child restraint vehicle. I f it is, it will have a label saying that it meets Federal Motor Vehicle Safety Standards. follow Then the instructions for the restraint. find these instructions on the restraint itself or booklet, or both.
60/40 bench seat, you can ask your Pontiac dealer to put it for you. If you want to install...
Page 87
Securing a Child Restraint Outside Seat Position 1-80 a Rear You’ll be using the lap-shoulder belt. about the top strap if the child restraint has one. 1. Put the restraint on the seat. Follow the instructions for the child restraint. 2.
Page 88
4. Buckle the belt. Make sure the release button is P u l l the rest of the shoulder belt the way out of the retractor to set the lock. positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 1-81...
Page 89
6. To tighten the belt, feed the shoulder belt back into the retractor while you push down on Push and pull the child restraint directions to be sure it is secure. To remove the child restraint, just unbuckle back all the way. The belt and let it safety will move freely again and be ready to work for an adult...
Page 90
Make the belt as long as possible by tilting the latch plate and pulling it along the belt. Put the restraint on the seat. Follow the instructions for the child restraint. Secure the child in the child restraint as the instructions say.
Page 91
7. Push and pull the child restraint in different directions to be sure it is secure. If it isn’t, secure the in a different place in the vehicle and restraint contact the child restraint maker for their advice about how to attach the child restraint properly. To remove the child restraint, just unbuckle the vehicle’s safety belt.
Page 92
4. While holding it out, run the belt through or around the child restraint. The child restraint instructions will show you how. Buckle the belt. Make sure the release button is positioned you would be able to unbuckle the safety belt quickly if you ever had to. 6.
Page 93
Securing a Child Restraint Front Seat Position Your vehicle has a passenger air bag. front rear-facing child restraint in this seat. Here’s why: 1-86 in the Right A child in a rear-facing child restraint can be seriously injured if the front passenger’s inflates.
Page 94
You’ll be using the lap-shoulder belt. See the earlier part about the top strap if the child restraint has one. 1. Because your vehicle has a front passenger always move the seat as far back securing a forward-facing child restraint. (See “Seats”...
Page 95
6. Pull the rest of the shoulder belt all the way out of retractor to set the lock. 1-88 7. To tighten belt, feed the shoulder belt back into the retractor while you push down on the child restraint. Push and pull the child restraint in directions to be sure it is secure.
Larger Children Children who have outgrown child restraints should wear the vehicle’s safety belts. you have the choice, a child should sit next to a window so the child can wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. Accident statistics show that children are safer if they are restrained in the rear seat.
Page 97
1-90 Never do this. are wearing Here two children belt can’t properly spread crash, the two children can be crushed together injured. A and seriously belt must be used by only person at time. What if a child is wearing a lap-shoulder belt, mall but the child is so that the shoulder belt is...
Page 98
CAUTIO’N: Never do this. Here a child is sitting in seat that has a lap-shoulder belt, but the shoulder part is behind the child. the child wears the belt in this way, in a crash the child might slide under the belt. The belt’s force would then be applied right on the child’s abdomen.
Safety Belt Extender the vehicle’s safety belt will fasten around you, you should use it. But if a safety belt isn’t long enough to fasten, your dealer will order you an extender. It’s free. When you go in to order it, take the heaviest coat you will wear, so the extender will be long enough for you.
Section 2 Features and Controls Here you can learn about the many standard and optional features on your Pontiac, and information on shifting and braking. Also explained are the instrument panel and the warning systems that tell you if everything is working properly and what to do if you have a problem.
Page 103
Keys CAUTION: Leaving young children in a vehicle with the ignition key is dangerous for many reasons. A child or others could be badly injured or even killed. They could operate power windows or other controls or even make the vehicle move. Don’t leave the keys in a vehicle with young children.
Page 104
If you need a new key, contact your Pontiac dealer, who can obtain the correct key code. Remember to carry the pre-cut emergency door key which Pontiac sends after delivery.
Door Locks CAUTION: Unlocked doors can be dangerous. Passengers especially children open the doors and fall out. When locked, the inside handle won’t open it. Outsiders can easily enter through an unlocked door when you slow down or stop your vehicle. This may not be so obvious: You increase the chance of being thrown out of the vehicle in a crash if the doors aren’t locked.
To lock either front door from the inside, push the locking lever forward. To unlock either front door from the inside, pull back on the locking lever. Power Door Locks From the inside, press the front of the power door lock switch (on either front door) to unlock all doors and the liftgate.
Page 107
You can lock all doors and the liftgate from the insid’e by pressing the rear of the power lock switch on either front door. If your vehicle is equipped with the Content Theft Deterrent system, the power door lock switch may cause the system to arm.
Page 108
Last Door Closed Locking The Last Door Closed Lockmg feature makes it easier to use your power door locks to lock all the doors and the liftgate when leaving your vehicle. When any door or the liftgate is open, the first time you attempt to lock the doors using the power lock switch or key chain transmitter (if equipped), will result three chimes to signal that Last Door Closed Locking is...
Keyless Entry System (Option) If your Pontiac has this option, you can lock and unlock your doors and the liftgate from about 3 feet (1 m) up to 30 feet (9 m) away using the remote keyless entry transmitter supplied with your vehicle.
Operation Remote Driver’s Door and All Door Unlock When you press UNLOCK on the key chain transmitter, only the driver’s door will unlock. five UNLOCK again within seconds, all the doors and the liftgate will unlock. If you would like all the doors to unlock the first time you press UNLOCK, see “Locks and Lighting Choices”...
Page 111
Remote Power Sliding Door Operation (Option) power sliding door (see “Power Sliding Door” later in this section), your remote transmitter will have a button that has a van symbol on it. Press it to open or close the sliding door. If the sliding door is locked, fxst unlock all doors (see “Remote Driver’s Door and All Door Unlock”...
Battery Replacement Under normal use, the battery in your remote keyless entry transmitter should last about two years. You can tell the battery is weak if the transmitter won't work at the no'rmal range in any location. If you have to get close to your vehicle before the transmitter works, it's probably time to change the battery.
Page 113
2. Gently pry the battery out of the tmnsmitter. Do not metd h g e s to ‘3op out” thebattery. 3. Reassemble the transmitter. Make sure the halvesare snapped tightly together wafer 4, Check the transmitter operation. itrstructiom resynchronizing your 2-12 Resynchronizing Your Remote Transmitter Your Remote Keyless Entry System uses a continually...
Overhead Console Switchbank This switchbank is located in the overhead console. The switches that you may find in this switchbank Interior Lights Override, Power Sliding Door Override, Power Sliding Door, Power Rear Quarter Windows and Sunroof. If your vehicle does not have some of the options controlled by these switches, there will be a blank button in its place.
To move the door forward, you must f i s t pull the door past the open detent position. Does Pontiac sliding door on the left side? your have If it does, this door is designed to open only a little if the fuel door is open.
Page 116
Lock the sliding door from inside the vehicle by moving the manual locking lever down. Unlock it by moving the lever up. If you have the optional power door locks, the sliding door lock has a delay feature. See “Power Door Locks” or “Locks and Lighting Choices”...
Page 117
To operate the power sliding door, the power sliding door override switch must be disabled. This switch is located in the overhead console switchbank. Pushing the bottom of the button will disable the power sliding door; it will not operate when either of the power door switches or the power sliding door button on the Remote Transmitter is pressed.
Page 118
significantly as the door approaches the latch position. 2-17...
Page 119
CAUTION: You or others could be injured if caught i n the path of the sliding door. Make sure the door path is clear before closing the door. To manually open the power sliding door when the power sliding door override feature inside or outside latch release and let go;...
Page 120
someone. To make sure the door does not slam shut, enable the power sliding door feature. Then if the door closes, it will close under the control of the power door system. To manually close the power sliding door when the override feature is disabled, pull the inside or outside latch release or the edge of the door.
Page 121
Sliding Door Child Security Lock Your Pontiac is equipped with a sliding door child security lock that helps prevent young children or other passengers from opening the sliding door from the inside. This lock is on both doors if your vehicle has the dual sliding doors.
If you want to open the sliding door when the security lock is on, unlock the sliding door and from the outside. you have the optional power sliding door, disable the power sliding door override feature. Press either power door switch. You should let adults and older children know how the security lock works, and how to cancel the lock.
Page 123
Liftgate To unlock the liftgate from the outside, turn the key in the cylinder clockwise. To lock the liftgate using the key, turn the key counterclockwise. 2-22 Open the liftgate using the handle recessed above the license plate. Once slightly opened, the liftgate will rise by itself.
Page 124
To close the liftgate, pull down on the handle, then firmly shut the liftgate. Don’t drive with the liftgate open, even slightly. See “Engine Exhaust” in the Index. A light on your instrument panel will liftgate is not completely closed (see “Door Ajar Warning Light”...
Content Theft-Deterrent (Option) vehicle your has this option, it has a theft-deterrent alarm system. A light located on top of your instrument panel (near the center of the vehicle, next to the windshield) will flash slowly to let everyone know that the system has been armed.
Page 126
Arming with the Key Chain Transmitter Your alarm system will arm when you use your key chain transmitter to lock the doors if the key is not in the ignition. The security light will turn on to let you know the system is arming.
When you park your Pontiac and open the driver’s door, you’ll hear a chime reminding you to remove your key from the ignition and take it with you. Always do this.
New Vehicle “Break-In” NOTICE: Your modern Pontiac doesn’t need an elaborate “break-in.” But it will perform better in the long you follow these guidelines: Don’t drive at any one speed slow for the first 500 miles (805 km). Don’t make full-throttle starts.
Page 129
LOCK (B): This is the only position in which you can remove the key. This locks your steering wheel, ignition tran,saxle. OFF (C): This position unlocks the steering wheel, ignition and transaxle, but does not send electrical power to any accessories. Use this position if your vehicle must be pushed or towed, but never push-start your...
To restart when you’re already moving, NEUTRAL (N) only. NOTICE: Don’t try to shift to PARK (P) if your Pontiac is moving. If you do, you could damage the transaxle. Shift to PARK (P) only when your vehicle is stopped.
NOTICE: Your engine designed to work with the electronics in your vehicle. If you add electrical parts or accessories, could change the the engine operates. Before adding electrical equipment, check with your dealer. If you don’t, your engine might not perform properly. I f you ever have to have your vehicle towed, see part of this manual...
Page 132
Instead of trying to list everything here, we ask that you contact your Pontiac dealer in the area where you’ll be parking your vehicle. The dealer can give you the best advice for that particular area.
PARK (P) before starting the engine. Your Pontiac has a Brake-Transaxle Shift Interlock (BTSI). You have to fully apply your regular brakes before you can shift from PARK (P) when the ignition key is in the RUN position.
Page 134
(R): REVERSE Use this gear to back up. NOTICE: Shifting to REVERSE (R) while your vehicle is moving forward could damage your transaxle. Shift to REVERSE (R) only after your vehicle is stopped. To rock your vehicle back and forth to get out of snow, ice or sand without damaging your transaxle, see “Stuck: In Sand, Mud, Ice or Snow”...
Page 135
AUTOMATIC OVERDRIVE (D): normal driving. If you need more power for passing, and you’re: Going less than 35 mph (56 km/h), accelerator pedal about halfway down. Going about 35 mph km/h) accelerator all the way down. You’ll shift down the next gear and have more power. THIRD (3): This position is also used for normal driving, but it offers more power and lower fuel economy than AUTOMATIC OVERDRIVE (D).
Page 136
NOTICE: your vehicle seems to start up rather slowly, or if seems not to shift gears as you go faster, something may be wrong with a transaxle system sensor. If you drive very far that way, your vehicle can be damaged. So, if this happens, have your vehicle serviced right away.
Parking Brake To set the parking brake, hold the regular down with your right foot and push down the parking brake pedal with your left foot. If the ignition is on, the brake system warning light will come on. See “Brake System Warning Light’’ in the Index.
Shifting Into PARK (P) It can be dangerous to get out of your vehicle if the shift lever is not fully in PARK parking brake firmly set. Your vehicle can roll. If you have left the engine running, the vehicle can move suddenly.
Page 139
Move the lever up as far as it will go. Move the key the LOCK position. Remove the key and take it with you. If you can leave your vehicle with the key in your hand, your vehicle is in PARK (P). 2-38 Leaving Your...
PARK (P). Shifting Out of PARK (P) Your Pontiac has Brake-Transaxle Shift Interlock (BTSI). You have to fully apply your regular brakes before you can shift from PARK (P), when the ignition is in the RUN position.
Parking Over Things That Burn Things that can burn could touch hot exhaust parts under your vehicle and ignite. Don’t park over papers, leaves, dry grass or other things that can burn. 2-40 Engine Exhaust Engine exhaust can kill. It contains the gas carbon monoxide (CO), which you can’t see or smell.
Running Your Engine While You’re Parked It’s better not to park with the engine running. But if you ever have to, here are some things to know. ’ CAUTION: Idling the engine with the air system control off could allow dangerous exhaust into your vehicle (see the earlier Caution under “Engine Exhaust”).
Locks and Lighting Choices Your Pontiac’s locks and lighting systems can be programmed with several different features. The features you can program depend on the options that came with your vehicle. programmed and which options you need to have to program them.
To program features, your vehicle must be in the programming mode. Follow these steps: 1. The Content Theft Deterrent system (if equipped) must be disarmed. 2. Remove the BCM PRGRM fuse from the instrument panel fuse block, located to the right of the glove box.
Mode 1: Both Off (The interior lamps will turn on or off at the same instant that a door is opened or closed). Mode 2 : Delayed Illumination Only (The interior lamps will stay on for about 25 seconds after all the doors and liftgate are closed, or until you lock the doors.) Mode 3: Exit Lighting Only (The interior lamps will come on whenever you remove the key...
Page 146
Last Door Closed Locking and Lockout Deterrent Your vehicle comes with this feature set in Mode 4. This means that: you leave your key in the ignition and leave the driver’s door open, you won’t be able to lock the doors using the power door lock switch.
Remote Driver’s Unlock Control Your vehicle comes with this feature set means that: when you press UNLOCK on your Remote Keyless Entry transmitter, the driver’s door will unlock. When you press UNLOCK on your Remote Keyless Entry transmitter again, all doors and the liftgate will unlock.
Page 148
Mode 1: Off (Remote lock and unlock confirmation are disabled.) Mode 2: Remote Lock Confirmation with Exterior Lamps Flashing Only Remote Lock Confirmation: When you use the key chain transmitter to lock your vehicle, your park lamps will flash briefly to let you know the command has been received.
Page 149
Content Theft Your vehicle comes with this feature set in Mode means that: If anyone damages or enters your vehicle while your Content Theft Deterrent system is arrned, an alarm sound and your park lamps will flash for if anyone tries to damage or enter your vehicle. To change the factory setting, while in the programming mode, do the following: 1.
Page 150
Content Theft Deterrent Arming and Disarming Your vehicle comes with this feature set in Mode 3. This means that: Your Content Theft Deterrent system will you lock the doors using either power door lock switch while any door or the liftgate is open and the from key is removed the ignition.
Page 151
Mode Key Chain Transmmer ArmlDisSum Only Your Content Theft Deterrent system will you lock the doors with your key chain transmitter. The key must be removed from the ignition when you lock the doors or the Content Theft Deterrent system will not arm.
Power Windows (Option) If you have power windows, the switches on the driver’s door control the front windows (when the ignition armrest is on). The left switch controls the driver’s window. The right switch controls the passenger’s window. The driver’s power window switch has two down positions.
Power Rear Quarter Windows This button, located in the Overhead Console switchbank, is used for opening and closing the rear quarter windows. Press the top ribbed side of the button to open the windows; both windows will open. The windows can be opened fully or only a portion depending on how long the button is pushed.
Turn SignaVMultifunction Lever The lever on the left side of the steering column includes your: Turn Signal and Lane Change Indicator, Headlamp High/Low Beam Changer, Windshield Wiper and Washer Control and Cruise Control (Option). Turn Signal and Lane Change Indicator signal has two upward (for right) and two turn downward (for left) positions.
you have trailer towing option with added wiring for the trailer lamps, the signal indicator will flash at a normal rate even if a turn signal bulb is burned out. Check the front and rear turn signal lamps regularly to make sure they are working.
Windshield Washer To wash your windsheld, press and hold the windshield washer paddle. The washers and wipers will operate. When you release the paddle, the washers will stop, and the wipers will continue to operate for two cycles, unless your wipers had already been on. In that case, the wipers will resume the wiper speed you had selected earlier.
Cruise Control (Option) With cruise control, you can maintain a speed of about 25 mph (40 km/h) or more without keeping your foot on the accelerator. This can really help on long trips. Cruise control does not work at speeds below about 25 mph (40 km/h).
Page 158
3. Push in the SET button at the end of the lever and release 4. Take your foot off the accelerator pedal. Resuming a Set Speed Suppose you set your cruise control at a desired speed This, of course, shuts off and then you apply the brake.
Page 159
You’ll go right back up to your chosen speed and stay there. Use the button to reset cruise (see “Setting Cruise Control” earlier in this section). If you hold the switch at R/A longer than half a second, the vehicle will keep going faster until you release the switch or apply the brake.
Page 160
Erasing Speed Memory the cruise control or the ignition. When you turn your cruise control set spetxjmenory& erased. Exterior Lam1 5 0 0 : Parking Lamps, Sidemarker Lamps, Taillamps and Instrument Panel Lights. Turning the dial to this setting headlamps, together with: Parking Lamps, Sidemarker Lamps, Taillamps and...
Lamps On Reminder If the driver’s door is opened and you turn the ignition to the OFF or LOCK position while leaving the lamps on, you will hear a warning chime. Running LarnpdAutomatic Daytime Headlamp Control (If Equipped) Daytime Running Lamps (DRL) can make it easier for others to see the front of your vehicle during can be helpful in many different driving conditions, but they can be especially.helpfu1 in the...
Fog Lamps The fog lamps switch located Panel switchbank. Push the fog lamp symbol on the rocker button to turn The green indicator light will glow. Push the ribbed part the switch to turn them o f f . The indicator light will go off.
Interior Lamps Control Turn the dial all the way to the right to turn on the interior lamps, if the interior lamps override switch is off. Turn the dial to the left to turn the lights off. Interior Lamps Override Switch This switch is located in the overhead console switchbank.
Delayed Illumination The delayed illumination feature will continue to illuminate the interior for seconds after all doors have been closed so that you can find your ignition and buckle your seatbelt at night. Delayed illumination is in the RUN or will not occur while the ignition ACCESSORY position.
Center Dome Lamp This lamp is located in the center of your vehicle and no switch its own. It will go on each time you open the doors, unless you enable the interior lights override. 2-64 Rear Cargo Lamp This lamp is located in the rear of your vehicle, above the liftgate opening, and has no switch of its own.
Rear Reading Lamps There are two reading lamps in the third row headliner, above the outboard seating positions. does not have dual sliding doors, there is also a reading lamp in the second row on the left side. To turn on or off either reading lamp, press the lamp lens.
Mirrors Inside Daymight Rearview Mirror reduce glare from lights behind toward you (to the night position). to the day position, push lever away from you. 2-66 Power Remote Control Mirrors- Turn the control to the left rearview mirror, or to the right to select the passenger’s side rearview mirror.
If you are not adjusting either mirror, leave the control in the center off position. This prevents moving the mirrors accidentally once you have them adjusted. Both outside mirrors can be folded forward or rearward. In the rearward position, they will fold almost flush with the vehicle.
Glove Box Your glove box below the instrument panel. vehicle has open the glove box, lift the latch release. Use the key to lock or unlock the glove box. The glove box door has a detent to prevent the door from lowering too far.
Overhead Console, If Equipped The optional front overhead console has reading lamps, a switchbank, storage compartments, including one for your garage door opener and one for your sunglasses, and a Driver Information Center (DIC). The features of the optional overhead console are explained on the following pages.
Page 171
Line up the button of the garage door opener with one of the four buttons on the compartment door. Make sure the garage door opener button is facing down and press the opener firmly into place. Once the opener is installed, use the black pegs inside the compartment door to make sure the lined area an the compartment door will contact the on your...
Page 172
Sunglasses Storage Compartment To open the sunglasses storage compartment in the overhead console, press the release button. Then pull the compartment down to the full open position. Driver Information Center will show information about the vehicle and The DIC the surroundings. EnglisMetric Button (EM) - You can change the display to a metric or English reading at any time by pressing EM.
Page 173
Mode Button (MODE) - Press this button to cycle through three modes of operation CompassRemperature mode and Trip Computer mode. In the Trip Computer mode, pressing the MODE button cycles through the five displays. Press the MODE button after the last Trip Computer display to return the DIC to the OFF mode.
Page 174
Automatic Compass Calibration The compass self-calibrating which eliminates the need manually set the compass. new, the calibration process may not be complete. these cases the calibration symbol, C, will be displayed where the compass reading is normally displayed. To calibrate the compass: In an area free from large metal objects, make three 360"...
Error Displays An error the vehicle’s speed sensor or fuel sender will cause -E- to be displayed. In the absence of vehicle communications, a double dash, is displayed. Cupholders There are cupholders on the inboard side of the front passenger seat the right side of the second row bench seat.
Removing and Replacing the Tray To remove the tray, slide it almost all the way out. Don’t let the tray lock over the plastic tabs at the end guide rails (A). Lift the tray out of the guide rails. The rubber mat under the tray also lifts out for cleaning.
Front Seat Storage Net There is a storage net that stretches between the front seats. Pull the hooks towards the passenger’s seat and insert them into the holes next to the cupholder. 2-76 To store the net, lift the hooks up and out of the holes. The net does not detach from the driver’s seat.
Convenience Net (Option) The optional convenience net is designed to help keep small loads, like grocery bags, from falling over during sharp turns or quick stops and starts. Install the convenience net at the rear of your vehicle, just inside the liftgate.
Page 179
Attach the lower hooks to the metal rings on the floor. The side of the convenience net closest to the front of the vehicle is higher than the side closest to the liftgate. Once you’ve loaded items into the net, stretch the higher side of the net up and over the top of the load to firmly in place.
When not in use, we recommend that you take down the convenience nets to extend their life and retain their elasticity. Luggage Carrier (Option) CAUTION: If you try to carry something on top vehicle that is longer or wider than the luggage carrier like paneling, plywood, a mattress, and forth...
Page 181
If you have the optional luggage carrier, you can load things on top of your vehicle. The luggage carrier has slats and side rails attached to the roof, as well as sliding crossrails and places to use for tying things down. These let you load some things on top of your vehicle, as long as they are not wider or longer than the luggage carrier.
Page 182
NOTICE: Loading cargo that weighs more than 150 lbs. kg) on the luggage carrier may damage your vehicle. When you carry cargo on the luggage carrier proper size and weight, put it on the slats, as forward as you can. Then slide the crossrail up against the rear of the load, to help keep it from moving.
Page 183
Use the adjustable tiedown loops in the side rails to help secure large loads. Reposition the tiedowns by turning them counterclockwise, then slide them along the side Turn the tiedowns clockwise to tighten them in place. Bumper strips on the luggage carrier crossrails help to ensure a quieter ride.
After removing the tiedowns other equipment, be sure to install the the piece of bumper strip that was cut. Ashtray and Cigarette Lighter The ashtray and cigarette lighter are located in the middle section of the instrument panel, below the switchbank.
NOTICE: Don’t put papers and other things that burn into your ashtrays. If you do, cigarettes or other smoking materials could set them on fire, causing damage. Side Ashtrays To open the ashtray, press the left side and turn it open. To remove the ashtray for cleaning, press the snuffer as you lift up the bottom of the ashtray.
Illuminated Visor Vanity Mirrors (if Equipped) Flip up the cover to expose the vanity mirror. The lamps will come on when you open the cover. Accessory Power Outlets The rear power outlet is located in the rear compartment on the driver's side. To remove the cover, pull the tab on the cover and pull it off.
Page 187
The front power outlet is located next to the ashtray and lighter. Pull the cover down to use the power outlet. The power outlets can be used to plug in electrical equipment such as a cellular telephone, CB radio, etc. Follow the proper installation instructions that are included with any electrical equipment you install.
Power Sunroof (Option) The sunroof has a sun shade to let in light without opening the sunroof. Slide the shade back to open. The power sunroof button is on the far right of the overhead console switchbank. The sunroof has two positions, vent and full open.
Page 189
Air Inflator System (Option) Your vehicle may be equipped with an you can inflate things like air mattresses and basketballs, and you can also use it to bring your tires up to the proper pressure. inflator is located in the rear compartment on the a i r driver’s side.
Page 190
To use your air inflator system, attach the appropriate nozzle adapter, if required, to the end of the hose that cover and put has the pressure gage. Then attach that end of the hose the cover. to the object you wish to inflate. Remove the protective cap covering the outlet.
Page 191
Your Information System The Instrument Panel 2-90...
Page 192
Your instrument panel designed to let you know at you're going, how much fuel you're using, and many other things you'll need to drive safely and economically. Refer to the accompanying diagram of your instrument panel to locate the components listed below. A.
Instrument Panel Cluster Your cluster includes indicator warning lights and gages that are explained on the following pages. 2-92...
Page 194
(used in the United States) or kilometers (used in Canada). Your Pontiac has a tamper-resistant odometer. If you see silver lines between the numbers, you’ll know that to turn someone has probably tried numbers may not be true.
Tachometer The tachometer displays the engine speed in revolutions per minute (rpm). NOTICE: Do not operate the engine with the tachometer in the red area, or engine damage may occur. 2-94 Warning Lights, Gages and Indicators This part describes the warning lights and gages that may be on your vehicle.
Safety Belt Reminder Light When the key turned to come on for about eight seconds to remind people fasten their safety belts, unless the driver’s safety belt already buckled. The safety belt light will also come on and stay on until the driver’s belt is buckled.
2-96 Brake System Warning Light Your Pontiac's hydraulic brake system is divided into two parts. turn still work and stop you. For good braking, though, you need both parts working well.
Page 198
This light should come on briefly when you turn RUN. If ignition key to it doesn’t come on then, have it fixed so it will be ready to warn you if there’s a problem. If the light comes on while you are driving, pull off the road and stop carefully.
Then start the engine again to reset the system. If the light still stays on, or comes on again while you’re driving, your Pontiac needs service. If the light is on but not flashing and the regular brake system warning light isn’t on, you...
Page 200
Traction Control System Warning Light (Option) This warning light should come on briefly as you start the engine. If the warning light doesn’t come on then, have it fixed so ready to warn you if there’s a problem. If it stays on, o r comes on when you’re may be a problem with your traction control system and your vehicle may need service.
Page 201
Low Traction Light (Option) If your vehicle has the traction control system, there will be a LOW TRACTION instrument panel. TRACTION When your anti-lock system is adjusting brake pressure to help avoid a braking skid, or when your traction control system is limiting wheel spin, the LOW 2-100 TRACTION light will come on.
This gage shows the engine coolant temperature. Engine Coolant Temperature Gage If the gage pointer moves into the red area, your engine is too hot! It means that your engine coolant has overheated. If you have been operating your vehicle under normal driving conditions, you should pull off the road, stop your vehicle and turn off the engine as soon as possible.
Engine Temperature Warning Light This light will come when your engine gets too hot. If this light comes on, it means that your engine coolant has overheated. If you have been operating your vehicle under normal driving conditions, you should pull road, stop your vehicle and off the engine as soon turn...
Page 204
(Service Engine Soon Light) SERVICE ENGINE SOON Domestic Your Pontiac is equipped with a computer which monitors operation of the fuel, ignition and emission control systems. This system is called OBD I1 (On-Board Diagnostics-Second Generation) and is intended to assure that emissions are at acceptable levels for the life of the vehicle, helping to produce a cleaner environment.
Page 205
This light should come on, as a check to show you it is working, when the ignition is on and the engine is not running. If the light doesn’t come on, have it repaired. This light will also come on during a malfunction in one of two ways: Light Flashing A misfire condition has been...
Are you on fuel? your engine starts to run out not run as efficiently designed since small amounts a i r are sucked into the fuel line causing a misfire. The system can detect this. Adding fuel should correct this condition.
Don’t keep driving if the oil pressure is low. If you do, your engine can become so hot that it catches fire. You or others could be burned. Check your oil as soon as possible and have your vehicle serviced. NOTICE: Damage to your engine from neglected oil problems can be costly and is not covered by...
Door Ajar Light This light will come on if any of the doors or the liftgate are not completely closed and the ignition is turned to RUN or STMT. If you shift the transaxle out of PARK (P) while the power sliding door is open or in the process of closing, and the power sliding door override feature is disabled, a buzzer will sound.
Your fuel gage tells you about how much fuel you have left, when the ignition is on. When the gage first EMPTY (E), you indicates still have a little fuel left, but you should get more soon. After filling the fuel tank, the gage will not read FULL (F) until the ignition is turned on.
Section 3 Comfort Controls and Audio Systems In this section, you’ll find out how to operate the comfort control and audio systems offered with your Pontiac. Be sure to read about the particular systems supplied with your vehicle. Comfort Controls...
Your control system uses comfort ozone-friendly 134a refrigerant. With these systems you can control the heating, cooling ventilation in your Pontiac. Your vehicle also has a flow-through ventilation system described later in this section. Fan Knob The left your system work you want.
Page 214
DEFOG: This setting directs air to the windshield and through the floor ducts. This mode is particularly useful during cold or inclement weather Pontiac Trans Sport’s larger windshield area. DEFROST This setting directs most of the air to the windshield and side window vents.
Air Conditioning very hot days, your vehicle will cool down quickly and economically if you open the windows long enough to let hot, inside air escape. For all settings, adjust the temperature control knob and fan speed as desired. To get maximum cooling or a quick cool-down on very hot days, press the and RECIRC buttons (the lights will glow) and turn the temperature knob to the left...
Ventilation System Your vehicle’s flow-through ventilation system supplies outside into the vehicle when it is moving. Outside air will also enter the vehicle when the fan Your vehicle has air outlets that allow you to adjust the direction and amount of airflow inside the vehcle. Push the outlet up down to direct airflow to your preference.
Rear Climate Control (If Equipped) If you have the optional rear climate control, the rear seat passengers can control the temperature and the amount of air directed to' the rear of the vehicle. The amount of air directed to the rear of the vehicle can also be adjusted using the front control for the rear fan.
Page 218
Rear Comfort Controls The rear climate control knobs are in a panel next to the second row seat. If your vehicle has the optional dual sliding doors, the panel is above the driver’s seat. Turn the temperature knob counterclockwise (to the blue area) for cooler air, or clockwise (to the red area) for warmer air.
Rear Air Vents: To maximize airflow through the rear heater outlet, place the left bucket seat in the second row in the forward position (see “Adjusting Rear Seats” in the Index). The vent behind the left rear seat is the cold air return vent.
Rear Window Defogger Press REAR (the light will glow) to warm the defogger grid on the rear window. The rear window defogger will turn off automatically after about 10 minutes of use. If you turn it on again, the defogger will operate for about five minutes. You can also turn the defogger off by turning off the ignition or pressing the switch again.
Audio Systems Your DelcoB audio system has been designed to operate easily and give years of listening pleasure. You will get the most enjoyment out of it if you acquaint yourself with it first. Find out what your Delco system can do and how to operate all its controls, to be sure you’re getting the most out of the advanced engineering that went into it.
Page 222
Finding a Station AM-FM: Press this button to switch between your The display shows selection. TUNE: Turn the lower knob to choose radio stations. SEEK Press the up or down m o w to go to the next lower higher or station and stay there.
AM-FM Stereo with Cassette Tape Player (If Equipped) Playing the Radio VUL: Push this knob to turn the system on and off. To increase volume, turn the knob clockwise. counterclockwise to decrease volume. RECALL: Display the time with pressing this knob. When the radio knob to recall the station frequency.
Page 224
Setting the Tone BASS: Slide the lever to the right or left to increase or decrease bass. TREBLE: Slide the lever to the right or left to increase or decrease treble. If a station is weak or noisy, you may want to decrease the treble.
Page 225
If any error occurs repeatedly or if an error can't be corrected, please contact your dealer. If your radio displays an error number, write it down and provide it to your dealer when reporting the problem. PREV (1): Press this button or the SEEK down m o w to search for the previous selection on the tape.
CLN: If this message appears on the display, the cassette tape player needs to be cleaned. It will still play tapes, but you should clean it as soon as possible to prevent damage to the tapes and player. See “Care of Your Cassette Tape Player”...
Page 227
Finding Station AM-FM: Press this button to switch between FM2. The display shows your selection. TUNE: Press this knob lightly so it extends. Turn it to choose radio stations. Plash the knob back into its stored position when you're not using it. SEEK: Press the up or down arrow to go to the next higher or lower station and stay there.
Page 228
If E and a number appear the radio display, the tape won’t play because of an error. ElO: The tape is tight and the player can’t turn the tape hubs. Remove the tape. Hold the tape with the open end down and try to turn the right hub counterclockwise with a pencil.
Page 229
AM-FM: Press this button to play the radio when a tape is in the player. T ’ E f l L A X Press this button to change to the tape function when the radio is on. The tape symbol with an arrow will appear on the display when the tape is active.
AM-FM Stereo with Compact Disc Player ( I f ' Equipped) Playing the Radio VOL: Push this knob turn the system on and off. To increase volume, turn the knob clockwise. Turn it counterclockwise to decrease volume. RECALL: Display the time with the ignition off by pressing this knob.
Page 231
Setting the Tone BASS: Slide the lever to the right or left to increase or decrease bass- TREBLE: Slide the lever to the right or left to increase or decrease treble, If a station is weak or noisy, you may want to decrease the treble.
RDM (3): Press this button to hear the tracks in random, rather than sequential, order. The display will show RDM. Press again to turn off random play. REV ( 5 ) : Press and hold this button to quickly reverse within a track.
Page 233
Finding Station AM-FM: Press this button to switch between AM, E M 1 The display shows your selection. F M 2 . TUNE: Press this knob lightly so it extends. choose radio stations. Push the knob back into its stored position when you’re not using it.
Page 234
If you’re driving on a very rough road or the disc may not play and (error) and a number may appear on the radio display. If the disc comes out, it could be that: The disc is upside down. is dirty, scratched or wet. The air is very humid.
Page 235
Remote Compact Disc Player ( I f Equipped) If you have this option, you can play one compact disc (CD) at a time. To load a into the player, hold the disc with the label side up and insert it carefully into the player (approximately half way).
Page 236
NEXT (3): Press this button to advance to the next track on the disc. (4): Press and hold this button to quickly reverse within a track. As the CD reverses, elapsed time will be displayed to help you find the correct passage. FWD (6): Press and hold this button to quickly advance within a track.
Rear Seat Audio This feature allows rear seat passengers to listen to a different music source than the iiont seat passengers AM-FM including automatic tone control, cassette tapes or CDs. For example, rear seat passengers may listen to a cassette tape or CD through headphones while the driver listens to the radio through the front speakers.
P.SET PROG: The front passengers must be listening to something different for each of these functions to work: Press this button to seek through your preset radio stations set on your primary radio pushbuttons. When a cassette tape is playing, press this button to go to the other side of the tape.
Page 239
Activating the Theft-Deterrent Feature The instructions which follow explain how to enter your code activate the THEFTLOCK system. It is secret recommended that you read through all nine steps before starting the procedure. NOTE: If you allow more than 15 seconds to elapse between any steps, the radio automatically reverts to time and you must start the procedure over at Step 4.
Page 240
Unlocking the Theft-Deterrent Feature After a Power Loss Enter your secret code as f Ilows; pause no more than 15 seconds between steps: 1. LOC appears when the ignition is on. 2. Press MIN and 000 will appear on the display. 3.
Steering Wheel Controls ( I f If your vehicle has this feature, you can control certain radio and remote playback functions using the buttons on your steering wheel. VOLUME: Press the up or down arrow to increase or decrease volume. 3-30 Equipped) PLAY: Press this button to play a cassette tape or...
Understanding Radio Reception Stereo stereo will give you the best sound. But FM signals will reach only about 10 to 40 miles (1 6 to 65 buildings or hills can interfere with FM signals, causing the sound to come and go. The range for most AM stations is greater than for FM, especially at night.
Page 243
of Your Cassette Tape Player tape player that is not cleaned regularly can cause reduced sound quality, ruined cassettes or a damaged mechanism. Cassette tapes should cases away from contaminants, direct sunlight and extreme heat. If they aren't, they may not operate properly or may cause failure of the tape player.
Care of Your Compact Discs Handle discs carefully. Store them in their original cases or other protective cases and away from direct sunlight and dust. If the surface of a disc is soiled, dampen a clean, soft cloth in a mild, neutral detergent solution and clean it, wiping from the center to the edge.
Section 4 Your Driving and the Road Here you’ll find information about driving on different kinds of roads and in varying weather conditions. We’ve included many other useful tips on driving. Defensive Driving Driving Drunk Having Control of Your Vehicle Your Braking System Information Anti-Lock Brake Information Traction Control System...
Drive defensively. start with a very Please important safety device in your Pontiac: Buckle up. (See “Safety Belts” Defensive driving really means “be ready for anything.” On city streets, rural roads or freeways, it means “always expect the unexpected.” Assume that pedestrians or other drivers are going to be careless and make mistakes.
Drunken Driving Death and injury associated with drinking and driving a national tragedy. It’s the number one contributor to the highway death toll, claiming thousands every year. Alcohol affects four things that anyone needs to drive a vehicle: Judgment Muscular Coordination Vision Attentiveness.
Page 251
alcohol that counts. For example, It’s the amount the same person drank double t h e e or 90 m l of liquor each) within an hour, the person’s BAC would be close to 0.12 percent. A eonsumes food just before during drinking will have a samewhat lower BAC level.
Page 252
The body takes about hour to rid itself of the alcohol in one drink. No amount of coffee or number of cold up. “I’ll showers will speed that be careful” isn’t the right answer. What if there’s an emergency, a need to take sudden action, as when a child darts into the street? A person with even a moderate BAC might not be able to react quickly enough to avoid the collision.
Control of a Vehicle You have three systems that make your vehicle go where yuu want it to go. They are the brakes, the steering and the accelerator. All three systems have to do their work at the places where the tires meet the road. Sometimes, as when you’re driving on snow or ice, it’s easy to ask more of those control systems than the tires and road can provide.
Avoid needless heavy braking. Some people drive in spurts heavy acceleration followed by heavy braking -- rather than keeping pace with traffic. This is a mistake. Your brakes may not have time to cool between hard stops. Your brakes will wear out much faster if you do a lot of heavy braking.
Page 255
Here’s how anti-lock works. Let’s say the road is wet. You’re driving Suddenly an animal jumps safely. front of you. You slam on the brakes. Here’s what happens with A computer senses that wheels are slowing down. If one of the wheels is about to stop rolling, the computer will the brakes separately work at each front wheel and at the...
Remember: Anti-lock doesn’t change the time you need to get your foot up to the brake pedal or always decrease stopping distance. If you get too close to the vehicle in front of you, you won’t have time to apply your brakes if that vehicle suddenly slows or stops.
Page 257
When the system is on, this warning light will come on to let you know if there’s problem with your traction See “Traction Control System Warning Light” in the Index. When this warning light is on, the system will not lirnit wheel spin.
Braking in Emergencies you can With anti-lock, steer and brake at the time. many emergencies, steering can help you more than even the very best braking. Steering Power Steering If you lose power steering assist because stops or the system not functioning, you can steer but it will take much more effort.
You can avoid these problems by braking time. But sometimes you can’t; there isn’t room. That’s the time for evasive action the problem. Your Pontiac can perform very well these. First apply brakes. your (See Emergencies”...
Off-Road Recovery You may find sometime that your right wheels have dropped off the edge of a road onto the shoulder while you’re driving. If the level of the shoulder is only slightly below the pavement, recovery should be fairly easy. Ease off the accelerator and then, if there is nothing in the way, steer so that your vehicle straddles the edge of the pavement.
Page 261
Do not get too close to the vehicle you want to pass while you’re awaiting an opportunity. For following too closely reduces your area of vision, especiaIIy if you’re following a larger vehicle. Also, you won’t have adequate space if the vehicle ahead suddenly slows or stops.
“overdriving” those conditions. But skids are always possible. The three types of skids correspond to your Pontiac’s three control systems. In the braking skid, your wheels aren’t rolling. In the steering or cornering skid, too much speed or steering in a curve causes tires to slip and lose cornering force.
Driving at Night /--_..Night driving is more dangerous than day driving. One reason is that some drivers are likely to be impaired by alcohol or drugs, with night vision problems, or by fatigue. 4-16 Here are some tips on night driving. Drive Don’t Adjust your inside rearview mirror to reduce the...
Night Vision see as one can well at night we get older these differences increase. A 50-year-old driver may require at least twice as much light to see the same thing at night as a 20-year-old. What you do in the daytime can also affect your night vision.
Driving in Rain and on Wet Roads Rain and wet roads can mean driving trouble. On a wet road, you can’t stop, accelerate or turn as well because your tire-to-road traction isn’t as good 4-18 And, if your tires don’t have much tread left, you’ll get even less traction.
Page 266
Driving too fast through large water puddles or even going through some car washes can cause problems, too. The water may affect your brakes. Try to avoid puddles. But if you can’t, try to slow down before you hit them. Wet brakes can cause accidents.
Hydroplaning Hydroplaning is dangerous. So much water can build up under your tires that they can actually This can happen if the road is wet enough and you’re going fast enough. When your vehicle it has little or no contact with the road. Hydroplaning doesn’t happen often.
driving: Here are ways to increase your safety in city City Driving One of the biggest problems with city streets is the amount of traffic on them. You’ll want to watch out for what the other drivers are doing pay attention traffic signals.
Freeway Driving Mile for mile, freeways (also called thruways, parkways, expressways, turnpikes or superhighways) are the safest roads. But have their own special rules. of all they 4-22 most important advice on freeway driving up with traffic and keep to the right. Drive at the same your turn signal.
Of course, you’ll find experienced and able service experts in Pontiac dealerships all across North America. They’ll be ready and willing to help Here are some things you can check before a trip:...
Highway Hypnosis there actually such condltion as “highway hypnosis”? Or is it just plain falling asleep at the wheel? highway hypnosis, lack of awareness, or whatever. There is something about an easy stretch of road with the same scenery, along with the hum of the tires on road, the drone of engine, and the rush of the wind against the vehicle that can make...
Page 272
If you drive regularly in steep country, or planning to visit there, here are some tips that can make your more trips safer and enjoyable. Keep your vehicle in good shape. Check all fluid levels and also the brakes, tires, cooling system and transaxle.
Winter Driving Here are some tips for winter driving: Have your Pontiac in good dupe far winter. You m y want to put winter emergency supplies in your vehicle. 4-26 Include an ice scraper, a small brush or broom, a supply...
Page 274
What’s the worst time for this? “Wet ice.” Very cold snow or ice can be slick and hard to drive on. But wet ice can be even more trouble because it may offer the least traction of all. You can get wet ice when it’s about fieezing (32 0”...
If You’re Caught in Blizzard If you are stopped by heavy snow, you could be in a serious situation. You should probably stay with your you know for sure vehicle unless that and you can hike through the snow. Here are some things to do to s u m o n help keep yourself and your passengers safe:...
Page 276
Snow can trap exhaust gases under your vehicle. This can cause deadly (carbon monoxide) gas to get inside. CO could overcome you and kill you. You can’t see it or smell it, so you might not know it is in your vehicle. Clear away snow from around the base of your vehicle, especially any that is blocking your exhaust pipe.
Loading Your Vehicle X>000000( PRINTED IN U.S.A MFD BY GENERAL MOTORS CORP GAWR FRT GAWR RR IGvwR THIS VEHICLE CONFORMS TO ALL APPLICABLE U.S. FEDERAL MOTOR VEHICLE SAFETY STANDARDS IN EFFECT ON THE OF MANUFACTURE SHOWN ABOVE. The Certificatioflire label is found on the rear edge of the driver’s door.
Page 278
Using heavier suspension components to get added durability might not change your weight ratings. your dealer to help you load your vehicle the right way. CAUTION: Do not load your vehicle any heavier than the GVWR, or either the maximum front or rear GAWR.
Page 279
You and your passengers could be seriously injured. Pull a trailer only if you have followed all the steps in this section. Ask your Pontiac dealer for advice and information about towing a trailer with your vehicle.
Page 280
Your vehicle can tow a trailer. To identify what the vehicle trailering capacity is for your vehicle, you should read the information in “Weight of the Trailer” that appears later in this section. But trailering is different than just driving your vehicle by itself. Trailering means changes in handling, durability and fuel economy.
4-34 YOU can ask your dealer for advice, or you can write us at Customer Assistance Center Pontiac Division One Pontiac Plaza Pontiac, Canada, write to: General Motors of Canada Limited Customer Communication Centre 1908 Colonel...
If you’re using a weight-canying hitch, the trailer tongue (A) should weigh 10 percent of the total loaded trailer weight (B). If you’re using a weight-distributing hitch, the trailer tongue (A) should weigh 12 percent of the total loaded trailer weight (B). After you’ve loaded your trailer, weigh the trailer and then the tongue, separately, to see if the weights proper.
Will you have to make any holes vehicle when you install a trailer hitch? you do, then be sure to seal the holes later when you remove the hitch. If you don’t seal them, deadly carbon monoxide (CO) from your exhaust can get into your vehicle (see “Carbon Monoxide’’...
Driving with a Trailer CAUTION: I f you have a rear-most window open and you pull a trailer with your vehicle, carbon monoxide (CO) could come into your vehicle. You can’t see or smell CO. It can cause unconsciousness or death.
Following Distance Stay at least twice as far behind the vehicle ahead as you would when driving your vehicle without can help you avoid situations that require heavy braking and sudden turns. Passing You’ll need more passing distance up ahead when you’re towing a trailer.
Turn Signals When Towing a Trailer When you tow trailer, your vehicle has to have extra wiring. The arrows on your instrument panel will flash whenever you signal a turn or lane change. Properly hooked up, the trailer lamps will also flash, telling other drivers you’re about to turn, change lanes or stop.
When You Are Ready to Leave After Parking on a Hill 1, Apply your regular brakes and hold the pedal down while you: Start your engine; Shift into a gear; and Release the parking brake. 2. Let up on the brake pedal. 3.
Section 5 Problems on the Road Here you’ll find what to do about some problems that can occur on the road. How to Use Warning Flashers Other Types of Warning Devices Step-by-step Procedure for Jump Starting Information You Should 5- 10 Towing Your Vehicle From the Front 5-11 Towing Your Vehicle From the Rear...
Hazard Warning Flashers Your hazard warning flashers let you warn others. They also let police know you have a problem. Your front and rear turn signal lamps will flash on and off. Your hazard warning flashers work no matter what position your key is in, and even if the key isn’t To turn off the flashers, push the switch down arad it will pop back up by itself.
Jump Starting If your battery has run down, you may want to use another vehicle and some jumper cables to start your Pontiac. But please use the following steps listed to it safely. On vehicles equipped with the optional power sliding door, a low voltage battery or replacing a battery may cause the system to become inoperative.
Page 293
If they are, it could connection you don’t want. You wouldn’t be able to start your Pontiac, and the bad grounding could damage the electrical systems. NOTICE: To avoid the possibility of the vehicles rolling, set...
Page 294
Find the positive (+) and negative (-) terminals on each battery. Your Pontiac has remote positive (+) jump starting terminal. The terminal is under a tethered cap at the front of the underhood fuse and relay center. Pull up the cap to access the remote positive terminal.
Page 295
Fans or other moving engine parts can injure you badly. Keep your hands away from moving parts once the engine is running. Connect the red positive (+) cable to the positive terminal of the vehicle with the dead battery. Use a remote positive terminal if the vehicle has one.
Page 296
8. Attach the cable at least 18 inches (45 cm) away from the dead battery, but not near engine parts that move. The electrical connection is just good there, but the chance of sparks getting back battery is much less. Now start the vehicle with the good battery and run the engine for a while.
Towing Your Vehicle a GM dealer or a professional towing to have service tow your vehicle. They can provide the right equipment and know how tow it without damage. See “Roadside Assistance” in the Index. If your vehicle has been changed or modified since it was factory-new by adding aftermarket items like fog lamps, aero skirting, or special these h n g s...
Page 298
vehicle can fall from a car carrier adequately secured. This can cause a collision, serious personal injury and vehicle damage. The vehicle should be tightly secured with chains or it is steel cables before transported. Don’t use substitutes (ropes, leather straps, canvas webbing, etc.) that can be cut by sharp edges underneath the towed vehicle.
Towing From the Front NOTICE: 55 rnph (80 km/h), 500 miles (800 Tow Limits Do not with ding-type equipment or the front bumper system will be damaged. Use wheel-lift or car-carrier equipment. Additional ramping be required for car-carrier equipment. Use safety chains and wheel straps. Towing a vehicle over rough surfaces could from damage a vehicle.
Towing From the Rear A towing dolly must be used under the front wheels when towingfkom the rear: NOTICE: not tow with sling-type equipment or the rear bumper system will be damaged. Use wheel-lift or car-carrier equipment. Additional ramping may be required for carcarrier equipment. Use safety chains and wheel straps.
Engine Overheating You will find a coolant temperature gage on your Pontiac’s instrument panel. See “Engine Coolant Temperature Gage” in the Index. You also have a low coolant level light on your instrument panel. See Coolant Light” the Index. Overheated Engine Protection...
If Steam Is Coming From Your Engine CAUTION: Steam from an overheated engine can burn you badly, even if you just open the hood. Stay away from the engine if you see or hear steam coming from it. Just turn it off and get everyone away from the vehicle until cools down.
NOTICE: your engine catches fire because you keep driving with coolant, your vehicle can be badly damaged. The costly repairs would not be covered by your warranty. See “Overheated Engine Protection Operating Mode” in the Index. If No Steam Is Coming From Your Engine If you the overheat warning but see or hear no steam, the problem may not be too serious.
Page 304
safe to When decide it’s lift the hood, here’s what you’ll see: Radiator Pressure Cap B. Electric Engine Fan C. Coolant Recovery Tank An electric fan under the hood can start up even when the engine is not running and can injure you.
Page 305
& CAr’TION: Heater and radiator hoses, and other engine hot. parts, can be very Don’t touch them. If you can be burned. Don’t run the engine if there is a leak. I f you run the engine, it could lose all coolant. That could you could cause an engine fire, and Get any leak fixed before...
Page 306
NOTICE: In cold weather, water can freeze and crack the engine, radiator, heater core and other parts. Use the recommended coolant and the proper coolant mix. You can be burned if you spill coolant on hot engine parts. Coolant contains ethylene glycol and it will burn if the engine parts are hot enough.
Page 307
Steam and scalding liquids from system can blow out and burn you badly. They are under pressure, and if you pressure cap even little they c ' m come out at high speed. Never turn the cap when the cooling system, including the radiator pressure cap, is hot.
Page 308
1. You can remove the radiator pressure cap when the cooling system, including the radiator pressure cap and upper radiator hose, is no longer hot. Turn the pressure cap slowly counterclockwise until first stops. (Don't press down while turning the pressure cap.) If you hear a hiss, wait for that to stop.
Page 309
Fill the radiator with the proper DEX-COOL@ coolant mixture, up to the base of the filler neck. 5-20 4. Start the engine and let it run until you can feel the upper radiator hose getting hot. Watch out engine fans. 5.
Page 310
6. Then replace the pressure cap. At any time during this procedure if coolant begins to flow out of the filler neck, reinstall the pressure cap. Be sure the arrows on the pressure cap line up like this. Then fill the coolant recovery tank to just below the words FULL COLD.
If a Tire Goes Flat It’s unusual for a tire to “blow out” while you’re driving, especially if you maintain your tires properly. If air goes out of a tire, it’s much more likely to leak out slowly. “blowout,” here are a few But if you should ever have tips about what to expect and what to do: If a front tire fails, the flat tire will create a drag that...
The following steps will tell you how to use the jack and change a tire. Removing the Spare Tire and Tools The equipment you’ll need is in the storage compartment at the rear of the vehicle, passenger’s side. Remove the side convenience nets.
Page 313
JACK & TOOL STORAGE Remove the jack and jacking tools by loosening the wing nut and bracket. Separate the plastic pouch from the jack jacking tools wrench and shaft) from the pouch. (folding 5-24 EXTENSION (CHISEL END) TIRE IS STORED UNDER SPARE REAR COMPARTMENT FLOOR (VALVE STEM...
Page 314
Slide the cable retainer through the center of the spare, then place the compact spare tire near the flat tire. The tools you'll be using include the jack (A), shaft (B) and folding wrench (C). 5-25...
Removing the Flat Tire and Installing the Spare Tire 1. If your vehicle has aluminum wheels, each wheel nut is covered with a nylon cap. Use the folding wrench to Completely remove the nylon caps from the wheel nuts before you loosen the nuts. 2.
Page 316
Near each wheel, there is a notch in the vehicle’s body. Position the jack and raise the jack head until it fits firmly into the notch in the vehicle’s frame nearest the flat tire. NOTICE: Do not place the jack under the rear axle control arms.
Page 317
not raise the vehicle yet. Put the compact spare tire near you. CAUTION: it is Getting under a vehicle when dangerous. If the vehicle slips off the jack, you could be badly injured or killed. Never get under a vehicle when is supported only 5 .
Page 318
Rust or dirt on the wheel, or on the parts to it is which fastened, can make the wheel nuts become loose after a time. The wheel could come and cause an accident. When you change wheel, remove any rust or dirt from the where the wheel attaches to the vehicle.
Page 319
10. Tighten the wheel nuts firmly in a criss-cross sequence, as shown. CAUTION: Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to become loose and even come off. This could lead to an accident. Be sure to use the correct wheel nuts. to replace them, be sure to get new GM original equipment wheel nuts.
Storing a Flat or Spare Tire and Tools ’ CAUTION: Storing a jack, a tire or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these i n the proper place.
tire, replace the bolt-on wheel covers or the nylon nut caps and the center cap. Tighten them “hand tight” over the wheel nuts, using the folding wrench. Compact Spare Tire Although the compact spare tire was fully inflated when your vehicle was new, it can lose air after a time. Check inflation pressure regularly.
If You’re Stuck: In Sand, Mud, Ice or Snow What you don’t want to do when your vehicle is stuck is to spin your wheels too fast. The method known as “rocking” can help you get out when you’re stuck, but you must use caution.
6-30 Tips on Vehicle Storage 6-31 Bulb Replacement Procedures 6-39 Windshield Wiper Blade Replacement 6-4 1 How and When to Check your Pontiac. This section begins with service and fuel information, 6-43 6-45 6-48 6-5 1 6-53 6-54 6-55 6-56...
Doing Your Own Service Work If you want to do some of your own service work, you’ll want to use the proper Pontiac Service Manual. It tells you much more about how service your Pontiac this manual can. To order the proper service manual, see “Service and Owner Publications’’...
If authorized Pontiac dealer for diagnosis to determine the cause of failure. In the event it is determined that the cause of condition may not be covered by your warranty.
Page 329
If this occurs, return to your authorized Pontiac dealer for service. To provide cleaner air, all gasolines in the United States are now required to contain additives that will help prevent deposits from forming in your engine and fuel system, allowing your emission control system to function properly.
Fuels in Foreign Countries you plan on driving another country outside the United States or Canada, the proper fuel may be hard to find. Never use leaded gasoline or any other fuel not recommended in the previous text on fuel. Costly repairs caused by use of improper fuel wouldn’t be covered by your warranty.
Page 331
Gasoline vapor is highly flammable. It violently, and that can cause very Don’t smoke if you’re near gasoline or refueling your vehicle. Keep sparks, flames materials away from gasoline. burns injuries. and smoking While refueling, hang the cap by the tether from the hook on the filler door hinge.
Page 332
Be careful not to spill gasoline. Clean gasoline from painted surfaces as soon as possible. See “Cleaning the Outside of Your Pontiac” in the Index. When you put the cap back on, turn it to the right (clockwise) until you hear a clicking sound.
Checking Things Under the Hood CAUTIO? An electric fan under the hood can start up and injure you even when the engine Keep hands, clothing and tools away from any underhood electric fan. CAUTIQN: Things that burn can get on hot engine parts and start a fire.
Page 334
Then g o to the front of the vehicle and push up on the underhood release. Lift the hood. The hood prop may be hot due to increased engine temperatures under the hood, so be careful when handling it. Use your hood prop sleeve when handling the hood prop.
Page 335
hood, vou’ll see these items: When & ‘ - T : A. Underhood Fuse and Relay Center B. Remote Positive Terminal C. Windshield Washer Fluid Reservoir D. Radiator Pressure Cap E. Power Steering Fluid Reservoir E Engine Oil Fill Location 6-10 ‘1 G .
Pull forward on the hood prop to release it from its storage clip. Then put the end of the hood prop into the slot in the underside of the hood. Before closing the hood, be sure all the filler caps are on properly.
Checking Engine Oil Pull out the dipstick and clean it with a paper towel or cloth, push it back in all the way. Remove it again, then keeping tip down, and check the level. When to Add Oil If the oil is at or below the ADD mark, then you’ll need to add at least one quart of oil.
What Kind of Oil to Use Oils recommended for your vehicle can be identified by looking for the “Starburst” symbol. This symbol indicates that the oil has been certified by the American Petroleum Institute (API). Do not use any oil which does not carry this Starburst symbol.
6-14 Engine Oil Additives Don’t add anything to your oil. Your Pontiac dealer is ready to advise if you think something should be added. When to Change Engine Oil If any one of these is true for you, use the short tripkity...
none of them is true, use the long trip/highway maintenance schedule. Change the oil and filter every k m ) 7,500 miles (12 or 12 months -- whichever occurs first. Driving a vehicle with a fully warmed engine under highway conditions causes engine oil to break down slower.
Page 341
Checking Replacing the Cleaner 1. Unlatch the two hooks on top of the air cleaner housing. 2. Turn back the a i r inlet panel and rest it on top housing. The air intake tube you do not need to disconnect it. 3.
Page 342
The access panel for the pollen filter glove box. 1. Pull the tab up and out on the outer access panel. Then squeeze the tab on the left of the inner access panel. The first pollen filter will pull straight out. remove the second, reach in and slide it towards the opening.
See “Scheduled Maintenance Services” in the Index. 6-18 How to Check Because this operation can be a little difficult, you may choose to have this done at your Pontiac dealership fluid Service Department. If you do it yourself, be sure to follow...
Page 344
Wait at least 30 minutes before checking the transaxle fluid level if you have been driving: When outside temperatures At high speed for quite a while. In heavy traffic especially in hot weather. While pulling a trailer. To get the right reading, the fluid should be at normal operating temperature, which is 180 "F to 200 "...
3. Check both sides of the dipstick, and read the lower level. The fluid level must be in the cross-hatched area. 4. If the fluid level is in the acceptable range, push the dipstick back in all the way. How to Add Fluid Refer to the Maintenance Schedule to determine what kind of transaxle fluid to use.
Engine Coolant The cooling stem in your vehicle is filled with DEX-COOL engine coolant. This coolant is designed to remain in your vehicle for 5 years or 150,000 miles (240 000 whichever occurs first if you add only DEX-COOL’ extended life coolant. The following explains your cooling system and how to add coolant when it is low.
What to Use Use a mixture of one-half clean water (preferably distilled) and one-half DEX-COOL@ coolant which won’t damage aluminum parts. If you use this mixture, don’t need to add anything else. Adding only plain water to your cooling system can be dangerous.
Checking Coolant The engine coolant reservoir is located on the driver’s side of the vehicle, above the air cleaner. When your engine is cold, the coolant level should be at FULL COLD, or a little higher. When your engine is warrn, the level should be up to FULL HOT, or a little higher.
Add coolant mixture at the recovery tank, but be careful not to spill it. can be burned if spill coolant on hot engine parts. Coolant contains ethylene glycol, and it will burn if the engine parts are hot enough. Don't spill coolant on a hot engine. Radiator Pressure Cap NOTICE: Your...
Power Steering Fluid The power steering fluid reservoir is located to the right of the windshield washer fluid reservoir, at the back of the engine compartment. When to Check Power Steering Fluid necessary It is not to regularly check power steering fluid unless you suspect there is a leak in the system or you hear an unusual noise.
Windshield Washer Fluid What to Use When you need windshield washer fluid, the manufacturer’s instructions before use. If you will be operating your vehicle in an area where the temperature may fall below freezing, use a fluid that has sufficient protection against freezing.
Brakes Brake Fluid Your brake master cylinder reservoir is here. It is filled with DOT-3 brake fluid. There are only two reasons why the brake fluid level in the reservoir might go down. The first is that the brake fluid goes down to an acceptable level during normal brake lining wear.
Page 353
When to a low level, your brake warning light will come on. See “Brake System Warning Light” in the Index. BRAKE What to Add When you do need brake fluid, use only DOT-3 brake fluid such as Delco Supreme ll@ (GM Part No.
Brake Wear Your Pontiac has front disc brakes and rear drum brakes. Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the brake pads are worn and new pads are needed. The sound may come and go or be heard all the time your vehicle is moving (except when you are pushing on the brake pedal firmly).
Battery Every new Pontiac has a Delco Freedom@ battery. You never have to add water to one of these, for a new battery, we recommend a Delco Freedom battery.
Page 356
Jump Starting For jump starting instructions, see “Jump Starting” in the Index. Bulb Replacement For the type of bulbs, see “Replacement Bulbs” in the Index. Halogen Bulbs CAUTION: Halogen bulbs have pressurized can burst if you drop or scratch the bulb. You or others could be injured.
Page 357
Remove the two wing nuts located on top of the headlamp assembly. 6-32 4. Unscrew the black retainer ring that holds the bulb assembly in place, and pull the bulb assembly the lamp housing. out of...
Page 358
5. Unhook the electrical connector by lifting up the blue tabs and pulling the bulb out. 6. Replace the new bulb through the black retainer ring and into the electrical connector. Push the bulb firmly enough so that the blue tabs hook over the tab on the bulb.
Page 359
8. Align the pins on the bottom of the headlamp assembly with the holes in the lamp support bracket while placing the holes in the assembly over the bolts where the wing nuts attach. 9. Replace and tighten the wing nuts. 10.
Page 360
4. Unscrew the bulb sockets from the lamp assembly by pressing the tab while turning counterclockwise. 5. Replace the bulb by pulling the old one out and gently pushing the new one into the lamp socket. 6. Line up the tabs on the sockets with the gaps in the socket holes and screw the bulb sockets back lamp housing until an audible click is heard (the tab popping back out).
Front Sidemarker Open the hood. 2. Remove the thumb screw attaching the parkinghum signal lamp assembly to the headlamp assembly. 3. pull the parkinghrn signal lamp assembly away from the body. 6-36 4. Unscrew the bulb sockets from the lamp assembly by turning counterclockwise.
Page 362
replace the lamp 7. To assembly, line up and insert the tabs on the back of the assembly with the slots in the fender. Engage the lower clip on the front of the lamp assembly, keeping upper tab on the parking/turn signal lamp assembly inboard of the headlamp bracket tab.
Page 363
7. Reinstall the taillamp assembly by inserting the outboard locating/retaining pins until seated. Secure with the inboard screws. For any bulb changing procedure not listed in this section, contact your Pontiac dealer service department. place ensuring lamp is...
Page 364
Windshield Wiper Blade Replacement Replacement blades for your vehicle are 24 inches (60 cm) in length. They come in different types are removed in different ways. Here’s how to remove the type with a release clip: Turn the wipers on to the lowest intermittent setting. 2.
Page 365
Tires Your new Pontiac comes with high-quality tires made by a leadmg tire manufachrer. you ever have your tire warranty and where to obtain questions about Pontiac service, see your Warranty booklet for details. CAUTION: Poorly maintained and improperly used tires are dangerous.
Page 366
Inflation Tire Pressure The Certificatioflire label, which is on the rear edge of the driver’s door, shows the correct inflation pressures for your tires when they’re cold. “Cold” means your vehicle has been sitting for at least three hours or driven no more than 1 mile (1.6 h ) .
Tire Inspection and Rotation Tires should be rotated every 6,000 to 8,000 miles (10 OOO tu 13 000 Any time you notice unusual km). wear, rotate your tires as soon as possible and check wheel alignment. Also check for damaged tires or wheels.
When It’s Time for New Tires One way to tell when it’s time for new tires is to check the treadwear indicators, which will appear when your tires have only 1/16 inch (1.6 less of tread remaining. You need a new tire any of the following statements are true: You can see the indicators at three or more places...
Mixing tires could cause you to lose control while driving. tires of different sizes (radial and bias-belted tires), the handle properly, and you could have a crash. Using tires of different sizes may also cause damage to your vehicle. Be sure to use the same size and type tires on all wheels.
Traction A, B, C The traction grades, from highest to lowest, are A, B, and C , and they represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete.
(except some air, aluminum wheels, which can sometimes be repaired). See your Pontiac dealer if any of these conditions exist. Your dealer will know the kind of wheel you need. Each new wheel should have the same load-carrying...
Used Replacement Wheels CAUTION: Putting a used wheel on your vehicle is dangerous. You can’t know how it’s been used or how far it’s been driven. could fail suddenly and cause an accident. I f you have to replace wheel, use new GM original equipment wheel.
When you use anything from a container to clean your Pontiac, be sure to follow the manufacturer’s warnings and instructions. And always open your doors or windows when you’re cleaning the inside.
Page 374
Using Foam-Type Cleaner on Fabric 1. Vacuum and brush the area to remove any loose dirt. 2. Always clean a whole trim panel or section. Mask surrounding along stitch or welt lines. trim 3. Mix Multi-Purpose Powdered Cleaner following the directions on the container label.
Non-Greasy Stains Stains caused by catsup, coffee (black), milk, mfi drinks, juice, wine, vomit, urine and blood can be removed follows: off excess stain, then sponge the Carefully scrape soiled area with cool water. If a stain remains, follow the foam-type instructions described earlier.
Cleaning the Top of the Instrument Panel Use only mild soap and water to clean the top surfaces of the instrument panel. Sprays containing silicones or waxes may cause annoying reflections in the windshield and even make it difficult to see through the windshield under certain conditions.
Cleaning Glass Surfaces Glass should be cleaned often. GM Glass Cleaner (GM P a r t No. 1050427) or a liquid household glass cleaner will remove normal tobacco smoke and dust films on interior glass. Don’t use abrasive cleaners on glass, because they may cause scratches.
Follow instructions under “Washing Your Vehicle.” Finish Care Occasional waxing or mild polishing of your Pontiac by hand may be necessary to remove residue from the paint finish. You can get GM-approved cleaning products from your dealer. (See “Appearance Care and Materials’...
Exterior painted surfaces are subject to aging, weather and chemical fallout that can take their toll over a period of years. can help to keep the paint finish looking new by keeping your Pontiac garaged or covered whenever possible. Cleaning Aluminum Wheels (If Equipped) Keep your wheels clean using a soft clean cloth with mild soap and water.
SAMPLE4UXVM072675 E N G I N E 4 7 CODE MODEL YEAR This is the legal identifier for your Pontiac. It appears on a plate the front corner of the instrument panel, on the driver’s side. You see it if you look through the windshield from outside your vehicle.
Some add-on equipment electrical components fmm working as they should. Your vehicle has an air bag system. Before attempting to add anything electrical to your Pontiac, see “Servicing Your Air Bag-Equipped Pontiac” in the Index. 6-58 Headlamp Wiring The headlamp...
Fuses and Circuit Breakers The wiring circuits in your vehicle are protected short circuits by combination of fuses, circuit breakers and fusible thermal links. Look a t the silver-colored band inside the fuse. If the band is broken or melted, replace the replace a bad fuse with a new one of the identical size and rating.
Page 385
FUSE USAGE CHART CIRCUIT ABSTTCS IGN BREAKERS AR DEFUG ELEC PRNDL HEADLAMP CRU'ISE TEIG Low' RRHVAC PWRQTRVENT FRTHVAC MED BLWR WSHR SWC ACCY MALL/RAD10/0IC STOP IHAZARD LAMP SCKT ABS MDL B A T LOCK ABS SOL SWC BACK UGH1 For More Information, See Owner's Manual Printed in CIRCUIT BREAKERS FRT HVAC...
Page 386
FUSES ..HAZARD Turn Signal Switch Recirculation Motor, HVACDRL Control Module, Heater-A/C Control, Temperature Door Actuator (Front) and Rear Window Defogger Relay ..IGN1 ELC Sensor, BCM, Elec&onic Brake Control Indicator Lamp Driver Module, Instrument Panel Cluster, Rear Side Door...
Page 387
Underhood Fuse and Relay Center This fuse and relay center is located in the engine compartment, in front of the windshield washer fluid reservoir. The fuses marked spare are available if a replacement fuse is needed. 6-62 MAXIFUSES 15-FIPMP SPDCONT -COOL FAN 2 (30 A) 16-HORN 4 5 C...
Page 388
Maxi Fuse . . . 5-IGN MAIN 1 Ignition Switch to Fuses A33S/TCS IGN, CRUISE, DRL, ELEC PRNDL, IGN 1, PSD, SIR, T/SIG and PCM [IGN MAIN Relay (Underhood Electrical Center Fuses: N C CLU, ELEK IGN, IGN l-U/H, INJ, TCC)] .
..the air conditioning system in your vehicle refrigerant, be sure the proper refrigerant i s used. you’re not sure, ask your Pontiac dealex 13.5 quarts (12.75 ...
Section 7 Maintenance Schedule This section covers the maintenance required for your Pontiac. Your vehicle needs these services to retain its safety, dependability and emission control performance. Introduction to Your Maintenance Schedule Your Vehicle and the Environment How this Section is Organized...
See your your Warranty and Owner Assistance booklet, or your Pontiac dealer for details. Introduction Your Vehicle and the Environment Proper vehicle maintenance not only helps to keep your vehicle in good working condition, but also helps the environment.
“Part C: Periodic Maintenance Inspections” explains Some of these important inspections that your Pontiac dealer’s department or another qualified service center should perform. “Part D: Recommended Fluids and Lubricants” lists some products GM recommends to help keep vehicle properly maintained.
If you have any questions on how to keep your vehicle in good condition, see your Pontiac dealer. This part tells you the maintenance services you should have done and when you should schedule them. If you go to your dealer for your service needs, you’ll know...
Maintenance Schedule Short Trip/City Definition Follow the Short Trip/City Maintenance Schedule if any one of these conditions is true for your vehicle: Most trips are less than 5 to 10 miles (8 to 16 This is particularly important when outside temperatures are below freezing.
Page 397
Maintenance Schedule Follow this maintenance schedule only if none of the conditions from the Short TripKity Maintenance Schedule is true. Do not use this schedule if the vehicle is used for trailer towing, driven in a dusty area or used off paved roads.
Short Trip/City Maintenance Schedule The services shown in this schedule up to 100,000 miles k m ) (166 000 should be performed after 100,000 miles k m ) (166 000 at the same intervals. The services shown k m ) at 150,000 (240 000 should be performed at...
Page 399
Short TripKity Maintenance Schedule #6,000 Miles (10 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information. (See footnote DATE ACTUAL...
Page 400
Short TriplCity Maintenance Schedule 12,000 Miles (20 000 km) El Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Replace passenger compartment air filter. Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information.
Page 401
Short Trip/City Maintenance Schedule 18,000 Miles (30 000 km) Change engine oil and filter (or every months, whichever occurs first). An Emission Control Service. Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation additional pattern mformatioa (See footnote DATE ACTUAL MILEAGE...
Page 402
Short Trip/City Maintenance Schedule 24,000 Miles (40 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Replace passenger compartment air filter. Rotate tires. See “Tire Inspection and Rotation’’ in the Index for proper rotation pattern and additional information.
Page 403
Short Trip/City Maintenance Schedule 30,000 Miles (50 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Replace air cleaner filter. Emission Control Service. “Tire Inspection and Rotate tires. See Rotation” in the Index for proper rotation pattern and additional information.
Page 404
Short Trip/City Maintenance Schedule 36,000 Miles (60 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Replace passenger compartment air filter. Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information.
Page 405
(&City Maintenance Schedule 42,000 Miles (70 000 km) Change engine oil and filter (or every months, whichever occurs first). An Emission Control Service. Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern additional information. (See footnote DATE ACTUAL MILEAGE 7-14...
Page 406
Short Trip/City Maintenance Schedule 48,000 Miles (80 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Replace passenger compartment air filter. Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information.
Short TriplCity Maintenance Schedule 50,000 MiZes (83 000 km) (Continued) When doing frequent trail'er towing. Uses such as found in taxi, police or delivery service. If you do not use your vehicle under conditions, the fluid andfilter do not require changing. DATE ACTUAL MILEAGE 7-16...
Page 408
Short Trip/City Maintenance Schedule 54,000 Miles (90 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Rotate tires. See “Tire Inspection and Rotation’’ the Index for proper rotation pattern and additional information. (See footnote +.) 57,000 Miles (95 000 km) Change engine oil and filter (or every...
Short TripKity Maintenance Schedule 60,000 Miles (100 000 km) Change engine oil and filter (or every months, whichever occurs first). An Emission Control Sewice. Replace passenger compartment air filter. Inspect engine accessory drive belt. Replace air cleaner filter. An Emission Control Service. 7-18 Inspect fuel tank, cap and lines for damage or leaks.
Page 410
Short Trip/City Maintenance Schedule 63,000 Miles (105 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Sewice. DATE ACTUALMILEAGE 66,000 Miles (110 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Sewice.
Page 411
Short Trip/City Maintenance Schedule 69,000 Miles (115 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. DATE ACTUAL MILEAGE 7-20 72,000 Miles (120 000 km) Change engine oil and filter (or every 3 months, whichever occurs first).
Page 412
Short TripKity Maintenance Schedule 75,000 Miles (125 000 Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. Inspect air cleaner filter if you are driving in dusty conditions. Replace filter if necessary. An Emission Control Service. (See footnote”f DATE ACTUAL MILEAGE...
Page 413
Short Trip/City Maintenance Schedule 81,000 Miles (135 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. DATE ACTUAL MILEAGE 7-22 84,000 Miles (140 000 km) Change engine oil 3 months, whichever occurs first). An Emission Control Service.
Page 414
Short Trip/City Maintenance Schedule 87,000 Miles (145 000 km) Change engine oil and filter months, whichever occurs first). An Emission Control Service. DATE ACTUAL MILEAGE 90,000 Miles (150 000 km) (or every Change engine oil and filter (or every months, whichever occurs first). An Emission Control Sewice, Replace air cleaner filter.
Page 415
Short Trip/City. Maintenance Schedule 93,000 Miles 000 km) (155 Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. DATE ACTUAL MILEAGE 7-24 96,000 Miles (160 000 krn) Change 3 months, whichever occurs first). An Emission Control Service.
Page 416
Short Trip/City Maintenance Schedule 99,000 Miles (165 000 km) Change engine oil and filter (or every 3 months, whichever occurs first). An Emission Control Service. DATE SERVICED ACTUAL MILEAGE 100,000 Miles (1 46 000 km) Inspect spark plug wires. An Emission Control Service. Replace spark plugs.
Page 417
Short TripKity Maintenance Schedule 100,000 Miles (1 66 000 km) (Continued) - When doing frequent trailer towing. - Uses such as found in taxi, police or delivery service. If you do not use your vehicle under any of these conditions, the fluid andfilter do not require changing. ACTUAL DATE SERVICED MILEAGE...
Page 418
Long Tripmighway Maintenance Schedule The services shown in this schedule up to 100,000 miles k m ) (166 000 should be performed after 100,000 miles (166 000 at the same intervals. The services shown at 150,000 miles (240 000 the same interval after 150,000 miles (240 000 km). See “Owner Checks and Services”...
Page 419
15,000 Miles (25 000 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Service. Replace passenger compartment air filter. Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information. (See footnote DATE ACTUAL MILEAGE...
Page 420
30,000 Miles (50 000 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Service. Replace passenger compartment air filter. Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information. (See footnote +.) Replace air cleaner filter.
Long Tripmighway Maintenance Schedule 45,000 Miles 000 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Service. Replace passenger compartment air filter. Rotate tires, See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information.
Page 422
Long Trip/Highway Maintenance Schedule In hilly or mountainous terrain. When doing frequent trailer towing. Uses such as found in taxi, police or delivery service. If you do not use your vehicle under any of these conditions, the fluid andfilter do not require changing. DATE ACTUAL MILEAGE SERVICED Miles (87 500 km)
Page 423
Long Tripmighway Maintenance Schedule 60,000 Miles (100 000 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Service. Replace passenger compartment air filter. Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information.
Page 424
Long Tripmighway Maintenance Schedule 67,500 Miles (112 Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Service. Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information. (See footnote DATE SERVICED ACTUAL -MILEAGE...
Page 425
Long Tripmighway Maintenance Schedule 82,500 Miles (137 500 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Service. Rotate tires. See “Tire Inspection and Rotation’’ in the Index for proper rotation information. pattern and additional (See footnote 7-34 90,000 Miles (150 000 km)
Page 426
Long TripMighway Maintenance Schedule 97,500 Miles (162 500 km) Change engine oil and filter (or every 12 months, whichever occurs first). An Emission Control Service. Rotate tires. See “Tire Inspection and Rotation” in the Index for proper rotation pattern and additional information. (See footnote DATE ACTUAL MILEAGE...
Page 427
Long Tripmighway Maintenance Schedule 100,000 Miles (166 000 km) (Continued) - In hilly or mountainous terrain. When doing frequent trailer towing. Uses such as found taxi, police or delivery service. I f you do not use your vehicle under any of these conditions, the fluid andfilter do not require 1 ’...
Part B: Owner Checks and Services Listed below are owner checks and services which should be performed at the intervals specified to help ensure the safety, dependability and emission control performance of your vehicle. Be sure any necessary repairs are completed at once. Whenever any fluids or lubricants are added to your vehicle, make sure they are the proper ones, as shown P a r t...
At Least Twice Year Restraint System Check Make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. If your vehicle has a built-in child restraint, also periodically make sure the harness straps, latch plates, buckle, clip, child head restraint and anchorages are working properly.
Page 430
Starter Switch Check When you are doing this check, the vehicle could move suddenly. If it does, you or others could be injured. Follow the steps below. Before you start, be sure you have enough room around the vehicle. Firmly apply both the parking brake (see “Parking Brake”...
Page 431
Ignition Transaxle Lock Check While parked, and with the parking brake set, try to turn the ignition key to LOCK in each shift lever position. The key should turn to LOCK only wFIQ~ the shift lever is in PARK (P). The key should come out only in LOCK.
Page 432
Part C: Periodic Maintenance Inspections Listed below are inspections and services which should be performed at least twice a year (for instance, each spring and fall). You should let your GM dealer’s service department or other qualified service center do these jobs.
Page 433
Part D: Recommended Fluids and Lubricants NOTE: Fluids lubricants identified below by name, p a t number or specification may be obtained from your GM dealer. FLUID/LUBRTCmT USAGE Engine oil with the American Engine Oil Petroleum Institute Certified Gasoline Engines “Starburst” symbol of the proper viscosity.
Page 434
USAGE FLUIDLLUBRICANT Chassis Chassis lubricant (GM Part Lubrication No. 12377985 or equivalent) or lubricant meeting requirements of NLGI 2, Category LB or GC-LB. Windshield GM Optikleen@ Washer Solvent Washer Solvent (GM Part No. 105 1515) or equivalent. Hood Latch Lubriplate lubricant aerosol (GM Part No.
Page 435
Part E: Maintenance Record After the scheduled services are performed, record the date, odometer reading and who performed the service in the boxes provided after the maintenance interval. 7-44 Any additional information from “Owner Checks and Services” or “Periodic Maintenance” can be added on the following record pages.
Section 8 Customer Assistance Information Here you will find out how to contact Pontiac if you need assistance. This section also tells you how to obtain service publications and how to report any safety defects. Pontiac Cares What Makes up Pontiac Cares?
Pontiac Cares With PONTIAC CARES, you are never more than a phone call away from having your concern taken care of. PONTIAC philosophy and CARES designed to make you realize that Pontiac recognizes you as a valuable customer, appreciates your purchase...
Courtesy Transportation All of these elements combine to make your driving experience an enjoyable one, and are discussed in greater detail further in your owner’s manual. Pontiac focusing on the changing needs of our customers and committed to giving an exceptional level customer care throughout the ownership experience.
Page 441
Pontiac dealers have the facilities, trained technicians and up-to-date information to promptly address any concerns you may have. However, if a concern has not been resolved to your complete satisfaction, take the following steps: STEP ONE Discuss your concern with a member of dealership management.
Vehicle delivery date and present mileage concern Nature of you to call us so we can give your inquiry We encourage prompt attention. However, if you wish to write Pontiac, address your inquiry to: Pontiac Customer Assistance Center One Pontiac Plaza...
(1 -800-762-3743) As the proud owner of new Pontiac vehicle, you are automatically enrolled in the Pontiac Roadside Assistance program. This value-added service is intended to provide you with peace of mind as you drive in the city or travel the open road.
Page 444
Vehicle Identification Number (VIN) Vehicle license plate number Pontiac reserves the right to limit services or reimbursement to an owner or driver when in Pontiac’s judgement the claims become excessive in frequency or type of occurrence. While we hope that you never have the occasion to use our service, it is added security while traveling for you and your family.
1-800-268-6800 for emergency services. Pontiac Courtesy Transportation Pontiac strives to give you a worry free ownership of your vehicle, and we realize the inconvenience of being without a car. Pontiac has come up with a way to...
Plan (CAMVAP). General Motors reserves the right to change eligibility limitations and/or to discontinue participation in this program. Both Pontiac and your Pontiac dealer are committed to making sure you are completely satisfied with your new vehicle. Our experience has shown that, if...
Some state laws may require you to use this program before filing a claim with a state-run arbitration program or in the courts. For further information, contact the BBB at 1-800-955-5 100 or the Pontiac Customer Assistance Center at 1 -800-PM-CARES. Warranty Information Your vehicle comes with a separate warranty booklet that contains detailed warranty information.
Please call us at 1-800-PM-CARES or write: Pontiac Customer Assistance Center One Pontiac Plaza Pontiac, MI 48340-2952 In Canada, please call us at 1-800-263-3777 (English) or 1-800-263-7854 (French). Or, write:...
Page 449
1997 PONTIAC SERVICE PUBLICATIONS ORDERING INFORMATION The following publications covering the operation and servicing the Service Publication Order Form in this book and mailing it in with your check, money or credit card information to Helm, Incorporated (address below.) CURRENT PUBLICATIONS FOR 1997 PONTIAC...
Section 9 Information ......Accessory Power Outlet Adding Equipment to the Outside Of Your Vehicle Adjusting the Bucket Seats Adjusting the Split Bench Seat .
Page 453
Better Business Bureau Mediation Brake Adjustment ........Fluid .
Page 454
... . . Cleaner. Cleaning Aluminurnwheels Built-in Child Restraint Exterior LampsLenses Fabric Glass Inside of Your Pontiac Instrument Panel Outside of Your Pontiac ... . Special Problems...
Page 455
......Door Ajar Light Driver Information Center DriverPosition ....Driver's Four-Way Manual Seat City Defensive...
Page 461
..Saddlebag Safety Belt Extender Safety Belts Adults ........Care Center Rear Passenger Position (Bench Seat) Center Rear Passenger Position (Bucket Seat)
Page 462
....Service and Owner Publications Service Publications Servicing Your Air Bag-Equipped Pontiac Sheet Metal Damage Shifting ......
Page 463
Third Row Solid Bench Seat Adjusting Folding the Seatback ........Removing Replacing Tilt Steering Wheel...
Page 464
..Turn SignalNultifunction Lever Turn Signals When Towing a Trailer ..Underbody Flushing Service ... Underbody Maintenance . . . Underhood Fuse and Relay Center Vehicle .
Station Information WINDSHIELD WASHER FLUID P6-26 TIRES REMOTE BAlTERY FUEL ENGINE COOLANT HOOD DOOR RECOVERY TANK RELEASE P6-3 P6-23 P6-8 For detailed information, refer to the page number listed, or see the index in the back of the owner's manual. 9-14...
Need help?
Do you have a question about the 1997 Trans Sport and is the answer not in the manual?
Questions and answers