Installing Input Drum And Rear Sun Gear; Front Sun Gear Identification; Installing Front Sun Gear; Installing Thrust Bearing And Race Assembly - Pontiac TRANS AM 1977 Service Manual

7A1-52 1977 PONTIAC SERVICE MANUAL
Fig. 7A1-102 Installing lnput Drum and Rear Sun Gear
INPUT DRUM REAR SUN GEAR
SNAP RING THRUST WASHER
(INPUT DRUM TO
(DRUM TO HOUSING)
REAR SUN GEAR)
1543
Fig. 7 ~ 1 - 1 0 3 F e a r Sun Gear and lnput Drum
REAR SUN
GEAR
Fig. 7A1-104 Installing Thrust Washer
CAUTION: The rear selective thrust washer must
be installed with the identification number toward
the fiont o f the transmission.
2. Install rear selective washer.
Fig. 7A1-105 Front Sun Gear Identification
Fig. 7A1-106 Installing Front Sun Gear
Fig. 7 x 0 7 lnsGlling Thrust Bearing and Race
Assembly
3.
Inspect output shaft to selective thrust washer snap
ring for damage or distortion.
NOTE:
I t may be necessary to move output shaft
upward by turning the adjusting screw on
J 25013-5
to
install output shaft to selective washer snap ring.