Handling Precautions; Esd Precautions - Oracle SPARC T8-4 Installation Manual

Related Information
"Server Overview" on page 12
■
"Installing the Rackmount Kit" on page 33
■
"CMA Kit Overview" on page 42
■

Handling Precautions

Caution -
Caution -
heavy and tip over.
Caution -
the main components must be removed, and a lift must be used. For a two-person installation,
the main components must be removed, and a lift is optional.
Caution -
rackmounting procedure to minimize confusion.
Related Information
"Physical Specifications" on page 17
■
"ESD Precautions" on page 25
■
"Installing the Server" on page 29
■
SPARC T8-4 Server Getting Started Guide
■

ESD Precautions

Electronic equipment is susceptible to damage by static electricity. Use a grounded antistatic
wriststrap, footstrap, or equivalent safety equipment to prevent electrostatic damage when you
install or service the server.
Deploy the antitilt bar on the equipment rack before beginning an installation.
Always load equipment into a rack from the bottom up so that it will not become top-
Do not attempt to move the server alone without a lift. For a one-person installation,
Always communicate your intentions clearly before, during, and after each step of the
Handling Precautions
Preparing for Installation 25