Lenovo HX1310 Installation And Service Manual page 850

Explanation:
Severity
Warning
User Response
Complete the following steps:
1. Go to F1 Setup > System Settings > Settings > Driver Health Status List and find a
driver/controller reporting Configuration Required status.
2. Search for the driver menu from System Settings and change settings appropriately.
3. Save settings and restart system.
• W.305800A DRIVER HEALTH PROTOCOL: Reports 'Failed' Status Controller. DRIVER HEALTH
PROTOCOL: Reports 'Failed' Status Controller
Explanation:
Severity
Warning
User Response
Complete the following steps:
1. Reboot the system.
2. If problem persists, switch to backup UEFI or update the current UEFI image.
3. Replace the system board.
• W.305800B DRIVER HEALTH PROTOCOL: Reports 'Reboot' Required Controller. DRIVER HEALTH
PROTOCOL: Reports 'Reboot' Required Controller
Explanation:
Severity
Warning
User Response
Complete the following steps:
1. No action required. The system will reboot at the end of POST.
2. If the problem persists, switch to the backup UEFI image or update the current UEFI image.
3. Replace the system board.
• W.305800C DRIVER HEALTH PROTOCOL: Reports 'System Shutdown' Required Controller.
DRIVER HEALTH PROTOCOL: Reports 'System Shutdown' Required Controller
Explanation:
Severity
Warning
User Response
Complete the following steps:
836
HX1310, HX2310-E, HX3310, HX3310-F Installation and Service Guide