Lenovo HX1310 Installation And Service Manual page 676

System - Other
SNMP Trap ID
22
CIM Information
Prefix: PLAT ID: 0163
User Response
1. Reseat hard disk drive n.(n = hard disk drive number). Wait 1 minute or more before reinstalling
the drive.
2. Replace the hard disk drive.
3. Make sure that the disk firmware and RAID controller firmware are at the latest level.
4. Check the SAS cable.
• 816f000d-040dffff : The Drive [StorageVolumeElementName] has been removed from unit
[PhysicalPackageElementName]. (Drive 13)
This message is for the use case when an implementation has detected a Drive has been Removed.
May also be shown as 816f000d040dffff or 0x816f000d040dffff
Severity
Info
Serviceable
Yes
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
22
CIM Information
Prefix: PLAT ID: 0163
User Response
1. Reseat hard disk drive n.(n = hard disk drive number). Wait 1 minute or more before reinstalling
the drive.
2. Make sure that the disk firmware and RAID controller and backplane firmware are at the latest
level.
3. Check the SAS cable.
• 816f000d-0410ffff : The Drive [StorageVolumeElementName] has been removed from unit
[PhysicalPackageElementName]. (Ext Drive)
This message is for the use case when an implementation has detected a Drive has been Removed.
662
HX1310, HX2310-E, HX3310, HX3310-F Installation and Service Guide