Table of Contents
Advertisement
Drive LEDs
Drive LEDs
The following table explains how to interpret the drive status LEDs.
LED
1
Ready to
Remove
2
Service Required
3
OK/Activity
(hard drives)
3
OK/Activity
(SSDs)
Note -
drive fault. See
(Service)" on page
Related Information
"Front Panel Components (Service)" on page 13
■
"Rear Panel Components (Service)" on page 15
■
62
SPARC T7-1 Server Service Manual • May 2017
The front and rear panel Service Required LEDs are also lit when the server detects a
"Front Panel Components (Service)" on page 13
15.
Color
Description
Blue
Indicates that a drive can be removed during a hot-service
operation.
Amber
Indicates that the drive has experienced a fault condition.
Green
Indicates the drive's availability for use.
■ On – Read or write activity is in progress.
■ Off – Drive is idle and available for use.
Green
Indicates the drive's availability for use.
■ On – Read or write activity is in progress.
■ Off – Drive is idle and available for use.
■ Flashes on and off – This situation occurs during hot-
service operations. You can ignore this situation.
and
"Rear Panel Components
Advertisement
Table of Contents
