Place ESD-sensitive components such as the printed circuit boards on an antistatic mat. The
following items can be used as an antistatic mat:
Antistatic bag used to wrap a replacement part
■
ESD mat
■
Disposable ESD mat (shipped with some replacement parts or optional components)
■
2.
Attach an antistatic wrist strap.
When servicing or removing server components, attach an antistatic strap to your wrist and then
to a metal area on the chassis.
See
"Safety Information" on page
Related Information
"Safety Information" on page 41
■
Extend the Server to the Service Position
You can service the following components with the server in the service position:
Drives or fillers
■
DVD drive
■
Power supplies
■
Fans
■
Memory risers
■
DIMMs
■
PCIe cards
■
SPM
■
eUSB drive
■
Battery
■
You can replace the drives and rear power supplies without extending the server into the
Note -
service position.
Verify that no cables will be damaged or will interfere when the server is
1.
extended.
Although the CMA that is supplied with the server is hinged to accommodate extending the
server, you should ensure that all cables and cords are capable of extending.
41.
Extend the Server to the Service Position
Preparing for Service
51