Verify The Motherboard - Oracle SPARC T7-1 Service Manual

Verify the Motherboard

Verify the Motherboard
1.
Use the Oracle ILOM show faulty command to verify that the fault has been
cleared.
See "Identify Faulted Components" on page 24
command.
2. Perform one of the following tasks based on your verification results:
If the previous steps did not clear the fault, see
■
Faults" on page 23
to diagnose component faults.
If the previous steps indicate that no faults have been detected, then the
■
component has been replaced successfully. No further action is required.
Related Information
"Install the Motherboard" on page 154
■
"Reactivate RAID Volumes" on page 161
■
164 SPARC T7-1 Server Service Manual • May 2017
for more information on using the show faulty
for information about the tools and methods you can use
"Detecting and Managing