Remove a Fan Module
You can perform this procedure while the server is running. See
Categories" on page 45
1.
Prepare for servicing.
a.
Attach an antistatic wrist strap.
See
b.
Extend the server to the maintenance position.
See
2.
Open the fan door.
Slide the two green buttons to unlock the fan door, then swing it open.
3.
Identify the faulty fan module with a corresponding Service Required LED.
76
SPARC T7-1 Server Service Manual • May 2017
for more information about hot-service procedures.
"Prevent ESD Damage" on page
"Extend the Server to the Service Position" on page
"Component Service
50.
51.