Release The Cma - Oracle SPARC T7-1 Service Manual

Release the CMA

2. From the front of the server, release the two slide release latches.
Squeeze the green slide release latches to release the slide rails.
3. While squeezing the slide release latches, slowly pull the server forward until the
slide rails latch.
Related Information
"Release the CMA" on page 52
■
"Remove the Server From the Rack" on page 54
■
Release the CMA
For some service procedures, such as replacing a power supply, if you are using a CMA, you
might need to release the CMA to gain access to the rear of the chassis.
Note -
for Installation" in SPARC T7-1 Server Installation
1. Press and hold the tab.
52 SPARC T7-1 Server Service Manual • May 2017
For instructions on how to install the CMA for the first time, refer to
Guide.
"Prepare the CMA