The fan covers on some units are secured with T6 Torx screws. Other units are secured
Note -
with No. 2 Phillips screws. (Illustration shows T6 Torx screws.)
Check that the two latches will engage when you close the fan cover.
3.
Related Information
"Replace the Top Cover" on page 178
■
Install and Close the Airflow Cover
Follow this procedure to reattach or install an airflow cover and to lower and secure the airflow
cover.
1.
If you need to reattach the airflow cover, open the fan cover.
Install and Close the Airflow Cover
Returning the Server to Operation
175