Communication Detail Settings - Mitsubishi Electric GOT2000 Series Connection Manual

■2. Bar code reader setting
Step 1.
Select [Common]
Step 2.
Set the interface to which the bar code reader is connected.
Step 3.
Check the [Use Bar Code] to set the function. For details on the function setting, refer to the following
manual.
➠
Step 4.
Clicking the detail setting button displays the Communication Detail Settings dialog box for each
communication driver.Make the settings according to the usage environment.
➠
Click the [OK] button when settings are completed.
11 - 6
11.4 GOT Side Settings
[Peripheral Setting]
GT Designer3 (GOT2000) Screen Design Manual

11.4.2 Communication detail settings

POINT POINT POINT
(1) Communication interface setting
When Channel No.8 is used, the following external devices, which use Channel No.8, cannot
be connected at the same time.
• RFID controller that uses the external authentication
• RFID controller that requires the power supply
When connecting the above-mentioned devices at the same time, set [Bar Code] to
Channels No. 5 to 7.
(2) Setting for the driver
To Channels No. 5 to 8, multiple [Bar Code] cannot be set.
2.
Click!
3.
[Bar Code] from the menu.
4.