Install And Setting The Required Software - Mitsubishi Electric GOT2000 Series Connection Manual

■2. Settings for the PC remote operation
Step 1.
Select [Common]
Step 2.
Set [Connecting I/F] of [PC Remote Operation] to [Disconnect].
Step 3.
Check the [Use PC Remote Operation (Ethernet)] of [PC Remote Operation (Ethernet)] to set. For details
on the settings, refer to the following manual.
➠ GT Designer3 (GOT2000) Screen Design Manual
Click the [OK] button when settings are completed.
12.3.3

Install and setting the required software

Install and set the required software according to the system configuration.
For the settings, refer to the following manual.
➠
GT Designer3 (GOT2000) Screen Design Manual
12.3.4 Precautions
■1. Ethernet system driver
Before using the PC remote operation function (Ethernet), install an Ethernet system communication driver to the GOT.
Set the Ethernet system communication driver for the controller setting or peripheral setting.
For the settings, refer to the following manual.
➠ GT Designer3 (GOT2000) Screen Design Manual
3.
2.
[Peripheral Setting] [PC Remote Operation] from the menu.
Click!
12.3 Ethernet Connection
12
12 - 13