Hdd Main Full/Hdd Sub Full/ Hdd Lpa Full/Archive Full; Emergency Rec Duration; Communication Port Settings; Mode - Mitsubishi Electric DX-TL2500E Installation And Operation Manual

Digital recorder
Hide thumbs Also See for DX-TL2500E:
Table of Contents

Advertisement

<INITIAL SET UP/INFORMATION> (continued)
1. Press the SET UP button } <SETTINGS> } <INITIAL SET
UP/INFORMATION> } <REAR TERMINAL SETTINGS> }
Select "HDD MAIN REMAIN", "HDD SUB REMAIN", "HDD
LPA REMAIN" or "ARCHIVE REMAIN" in the <CALL OUT
SETTINGS> screen. Display the desired setting and confirm.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
By pressing the WARNING RESET button, the HDD
capacity and archive capacity warning from the CALL
OUT terminal can be cancelled.
INFORMATION
For the relationship of the warning display and CALL
OUT signal output,
warning will be displayed regardless if the output item
for the CALL OUT signal is set to "Fixed", the condition
to output CALL OUT signals can be added when the
output is set to "Selectable". For example, the buzzer
can be set to sound when reaching a value set in "HDD
MAIN REMAIN", "HDD SUB REMAIN", "HDD LPA RE-
MAIN" or "ARCHIVE REMAIN" of the <CALL OUT SET-
TINGS> screen if "BUZZER" in the <REAR TERMI-
NAL SETTINGS> screen is set to "WARNING".
• HDD MAIN FULL/HDD SUB FULL/HDD LPA FULL/
ARCHIVE FULL
When the HDD is full, the CALL OUT terminal outputs a CALL
OUT signal.
<CALL OUT SETTINGS>
HDD MAIN REMAIN
>>HDD MAIN FULL
HDD SUB REMAIN
HDD SUB FULL
HDD LPA REMAIN
HDD LPA FULL
ARCHIVE REMAIN
ARCHIVE FULL
"HDD SUB FULL" is appeared when the "HDD
SETTING" is selected on "PARTITION" ("LONG PRE-
ALARM") of the <INITIALIZATION> screen.
"HDD LPA FULL" is appeared when "LONG PRE-
ALARM" is selected on "HDD SETTING" of the <INI-
TIALIZATION> screen after installing EXTRA HDD to
"INTERNAL HDD A".
"ARCHIVE FULL" is appeared when "ARCHIVE• COPY"
is selected on "ID4•ID5" of the <INITIALIZATION> screen.
Setting ( default : "OFF" )
"ON" : Signal is outputted when the recording capacity
becomes full.
"OFF" : No signal is outputted when the recording ca-
pacity becomes full.
1. Press the SET UP button } <SETTINGS> } <INITIAL SET
UP/INFORMATION> } <REAR TERMINAL SETTINGS> }
Select "HDD MAIN FULL" , "HDD SUB FULL", "HDD LPA
FULL" or "ARCHIVE FULL" in the <CALL OUT SETTINGS>
screen. Display the desired setting and confirm.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
54
see pages 92, 93. Although the
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF

EMERGENCY REC DURATION

The recording time for emergency recording can be set.
<REAR TERMINAL SETTINGS>
MODE OUT 1
MODE OUT 2
MODE OUT 3
MODE OUT 4
MODE OUT 5
KEY SOUND
BUZZER
REMAIN HDD
CALL OUT SETTINGS
>>EMERGENCY REC DURATION
For details concerning setting EMERGENCY RE-
CORDINGS,
see page 68.
Setting ( default : "10M" )
"1M", "2M", "5M", "10M", "20M", "30M", "60M"
1. Press the SET UP button } <SETTINGS> } <INITIAL SET
UP/INFORMATION> } Select "EMERGENCY REC
DURATION" in the <REAR TERMINAL SETTINGS> screen.
Display the desired setting and confirm.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.

COMMUNICATION PORT SETTINGS

<INITIAL SET UP/INFORMATION>
HDD SETTINGS
AUDIO RECORDING
REAR TERMINAL SETTINGS
>>COMMUNICATION PORT SETTINGS
CAMERA CONTROL
INFORMATION/SERVICE
PASSWORD
LANGUAGE SELECTION
1. Press the SET UP button } <SETTINGS> } Select
"COMMUNICATION PORT SETTINGS" in the <INITIAL SET UP/
INFORMATION> screen and turn the SHUTTLE ring clockwise.
• The <COMMUNICATION PORT SETTINGS> screen appears.
<COMMUNICATION PORT SETTINGS>
>>RS-232C
ETHERNET
RS-232C
Settings for the communication device connected to this
unit is set.

• MODE

This unit can be remote controlled from a PC connected
to the RS-232C terminal. Comments can also be inputted
from a PC for recording of comments along with the video.
<RS-232C>
>>MODE
SETTINGS
Setting ( default : "REMOTE A" )
"REMOTE A" : This unit can be controlled from a PC
and every status information is returned from the unit.
"REMOTE B" : This unit can be controlled from a PC and
from the unit when the status for command is changed.
"REMOTE C" : This unit can be controlled from a PC
with no status information.
"OFF" : This unit cannot be controlled from a PC.
OFF
OFF
OFF
OFF
OFF
ON
OFF
MAIN-10%
10M
OFF
REMOTE A

Advertisement

Table of Contents
loading

Table of Contents