Mitsubishi Electric GOT2000 Series Connection Manual page 372

■2. When using the wireless LAN
For details of the wireless LAN setting, refer to the following.
➠
14.4 Setting in Personal Computer
For connecting the VNC
to the personal computer to be connected and set it.
Refer to the following for details of the VNC
➠
14 - 6
14.4 Setting in Personal Computer
POINT POINT POINT
Ethernet-based driver
®
For using the VNC server, any of the following Ethernet communication drivers must be set on
the GOT.
• Gateway
• Ethernet Download
• Ethernet (MELSEC), Q17nNC, CRnD-700, Gateway
• Ethernet (FX), Gateway
• Ethernet (OMRON), Gateway
• Ethernet (KEYENCE), Gateway
• Ethernet (TOSHIBA nv), Gateway
• Ethernet (FUJI), Gateway
• Ethernet (YASKAWA), Gateway
• Ethernet (YASKAWA MP3000), Gateway
• Ethernet (YOKOGAWA), Gateway
• EtherNet/IP (AB), Gateway
• EtherNet/IP (AB Tag), Gateway
• Ethernet (SIEMENS S7), Gateway
• Ethernet (SIEMENS OP), Gateway
• Ethernet (SLMP), Gateway
• MODBUS/TCP, Gateway
• Ethernet (MICROCOMPUTER)
In the peripheral setting, set [Destination I/F] in [Ethernet Download] for the [PC (Data Transfer)]
dialog box.
To connect controllers including a programmable controller to the GOT by using the Ethernet
connection, no setting is required.
For the details of [Ethernet Download] , refer to the following
➠
GT Designer3 (GOT2000) Screen Design Manual
19. WIRELESS LAN CONNECTION
®
server to the personal computer (VNC
®
client software installation method and setting method.
GT Designer3 (GOT2000) Screen Design Manual
®
client), it is necessary to install the VNC
®
client software