2Communication Detail Settings - Mitsubishi Electric GOT2000 Series Connection Manual

2.6.2 Communication detail settings
Make the settings according to the usage environment.
Item
Transmission Speed
Data Bit
Stop Bit
Parity
Host Address
Format
Interrupt Data Byte
Special Interrupt
Code
Control Method
32bit Storage
2 - 84
2.6 GOT Side Settings
Description
Set this item when change the transmission speed used for
communication with the connected equipment.
(Default: 19200bps)
Set this item when change the data length used for communication
with the connected equipment.
(Default: 7bits)
Specify the stop bit length for communications.
(Default: 1bit)
Specify whether or not to perform a parity check, and how it is
performed during communication.
(Default: Even)
Specify the host address (station No. of the PLC to which the GOT is
connected) in the network of the GOT.
(Default: 0)
Select the communication format.
(Default: 1)
Specify the number of bytes of interrupt data.
(Default: 1byte)
Set whether or not to output the special interrupt code.
(Default: No)
Set this item when selecting the XON/XOFF control for the control
method.
(Default: No)
Select the steps to store two words (32-bit data).
(Default: LH Order)
Range
4800bps, 9600bps, 19200bps,
38400bps, 57600bps,
115200bps
7bits/8bits
1bit/2bits
None
Even
Odd
0 to 31
1 to 15
1byte, 2byte, 4byte
Yes or No
XON/XOFF, No
LH Order/
HL Order