Parameter settings
The mode setting, module operations forced change setting, target device response monitoring time setting and module
READY signal delay time setting of MES interface module are set in the parameter setting of the engineering tool.
For details on the parameter setting, refer to the following manual.
MELSEC iQ-R MES Interface Module User's Manual (Application)
• CW Configurator does not support it.
Startup method
Operating procedure
1.
Start the engineering tool.
Select [MELSOFT] [GX Works3]
*1 Select [All apps] on the Start screen or [Start] [All Programs]/[All apps].
*2 Does not appear in Windows 8 or later.
Parameter settings
Operating procedure
1.
Create a new project.
Select [Project] [New] from the menu.
2.
Select "Series", "Type", and "Program Language", and click the [OK] button.
3.
Set whether to use module labels, click the [OK] button.
4.
Display the "Add New Module" screen.
Select "Parameter" on the Navigation window, right-click the "Module Information" and select [Add New Module].
4 PROCEDURE BEFORE OPERATION
56
4.2 Starting an MES Interface Module and an Configuration Personal Computer
*2
[GX Works3] from Windows Start
*1
.