Mitsubishi Electric GOT2000 Series Connection Manual page 411

19.2 GOT Side Settings
19.2.1 Wireless LAN setting
Step 1.
Select [Common] → [GOT Setup] → [Advanced Setting] → [Wireless LAN setting] from the menu.
Step 2.
As necessary, Select [Station] or [Access Point] to [Operation Mode].
For details of the setting, refer to the following.
➠
GT Designer3 (GOT2000) Screen Design Manual
Click the [OK] button when settings are completed.
19.2.2 Setting communication interface (Controller Setting)
Step 1.
Select [Common]
Select [Communication Setting] in the [Controller Setting] window.
Step 2.
Select [Use the function of Gateway] and following items.
• Connecting Means :
wireless LAN or Standard Ethernet + wireless LAN
• Mode : wireless LAN
• I/F : Extended I/F(wireless LAN)
• Driver : wireless LAN
Step 3.
The detailed setting is displayed after Connecting Means, Mode, I/F, and Driver are set.
Make the settings according to the usage environment.
➠ 19.2.3 Communication detail settings
Click the [OK] button when settings are completed.
1.
[Controller Setting] from the menu.
POINT POINT POINT
The settings of connecting equipment can be set and confirmed in [I/F Communication Setting].
For details, refer to the following.
➠ 1.1.2 I/F communication setting
2.
3.
Click!
19.2 GOT Side Settings
19
19 - 3