Mitsubishi Electric GOT2000 Series Connection Manual page 197

(6) Set clock data (5) command (w/out station No.), set clock data (F) command (w/station No.)
The following shows an example of setting clock data of GOT at station No.27.
(Assuming the clock data of GOT is to be set to "2009, October 1, 18:46:49 Thursday".)
Item
(format 3: GOT-F900 Series microcomputer connection (ASCII))
Request message
(host GOT)
(format 4: GOT-F900 Series microcomputer connection (Binary))
Response
message during
normal
communication
(GOT host)
Response
message during
faulty
communication
(GOT host)
POINT POINT POINT
When a wrong day of the week has been set by the clock data setting command
If a wrong day of the week is set by the clock data setting commands, the clock data will differ
from the time displayed on the utility.
Example:When October 1, 2009 (Tuesday) is set by the clock data setting command (the actual
day of the week is Thursday), Thursday (THU) will be displayed on the utility time display.
After execution
Com-
Station No. Year data Month data
mand
F 2 7 0 9 1
46 32 37 30 39 31
H H H H H H
(H) (L) (H) (L) (H)
Station
Com-
No.
mand
F 1B
H
Time display
2009/10/01 18:46:49
THU
Message format
Day Data Hour data Minute data
0 0 1 1 8 4
30 30 31 31 38 34
H H H H H H
(L) (H) (L) (H) (L) (H)
Year Month Day Hour Minute Second
data data data data data
data
09 0A 01 12 2E 31
H H H H H H
ACK
06
H
NAK
15
H
3.4 Message Formats
Second Day-of-
data week data
6 4 9 0 4
36 34 39 30 34
H H H H H
(L) (H) (L) (H) (L)
Day-of-
week data
04
H
3 - 43
3