Static Pressure Settings; Cn24 Operation During Defrost; Fan Speed During Heating Mode, Thermal Off - Mitsubishi Electric PAC-US444CN-1 Installation And Instruction Manual

Static Pressure Settings
SW2-1, SW2-2, SW2-3: These adjust the static pressure function settings of the
indoor unit according to the following table:
DIP switch position on
PAC-US444CN-1
SW2-1 SW2-2
OFF OFF
OFF OFF
OFF ON
OFF ON
ON OFF
ON OFF
ON ON
ON ON
*Refer to the appropriate Indoor Unit Installation Manual for Mode 8 and Mode 10
function setting definitions.
CN24 Operation During Defrost
SW2-4: Adjusts Mode 23 function settings according to the following table:
SW2-4
OFF
ON
*Refer to the appropriate Indoor Unit Installation Manual for Mode 23 function setting
definitions.
Fan Speed During Heating Mode, Thermal Off
SW2-5: Adjusts Mode 25 initial setting (fan speed in thermal off for heating)
according to the following table:
SW2-5
OFF
ON
© 2015 Mitsubishi Electric US, Inc.
SW2-3 Mode 8
OFF Not set
ON Not set
OFF 2
ON 2
OFF 1
ON 1
OFF 3
ON 3
Result
Setting 2 (Default)
Setting 1
sandium.com
Indoor Unit Settings
Mode 10 Mode 23
Not set Not set
Not set Not set
1 Set by SW2-4
2 Set by SW2-4
1 Set by SW2-4
2 Set by SW2-4
1 Set by SW2-4
2 Set by SW2-4
Fan and CN24
ON
OFF
Result
Extra low (Default)
Set by Thermostat Interface
Mode 11
Not set
Not set
2
2
2
2
2
2
7