Communication Specification - Mitsubishi Electric ER-1V680D1 User Manual

6.3

Communication Specification

Communicates with an RF tag depending on the setting of Communication specification area (Un\G1, Un\G4001).
Item
Trigger
Auto
Repeat auto
FIFO trigger
FIFO repeat
Multi-trigger
Multi-repeat
• When ID command execution request (Y14, Y1C) is turned on, the command is executed in the timing
specified in Communication specification area (Un\G1, Un\G4001). ( Page 125 ID command execution
request (Y14, Y1C))
• Specify the command to execute in Command code specification area (Un\G0, Un\G4000). ( Page 40
Command)
• The area from Un\G0 to Un\G1123 is used for the buffer memory of CH1, and the area from Un\G4000 to
Un\G5123 is used for the buffer memory of CH2. ( Page 126 List of buffer memory addresses)
6 FUNCTIONS
66
6.3 Communication Specification
Communication Description
specification area
(Un\G1, Un\G4001)
0000H Communicates with an RF tag and outputs the result when ID
command execution request is turned on with the RF tag stopped
within the antenna communication area.
0001H Automatically starts to communicate with an RF tag coming into the
antenna communication area and outputs the result.
0002H Automatically detects an RF tag coming into the antenna
communication area and communicates with the tag. Communicates
with tags coming into the communication area one after another until
ID command execution request is turned off.
0003H Communicates with an RF tag and outputs the result when ID
command execution request is turned on with the RF tag stopped
within the antenna communication area.
After communicating, the RF tag is prohibited to move.
0004H Automatically detects an RF tag coming into the antenna
communication area and communicates with the tag. Communicates
with tags coming into the communication area one after another until
ID command execution request is turned off.
After communicating, the RF tag is prohibited to move.
0005H Communicates with RF tags stopped in the antenna communication
area.
0006H Automatically detects RF tags coming into the antenna
communication area and communicates with the tags.
Communicates with tags coming into the communication area one
after another until ID command execution request is turned off.
After communicating, the RF tag is prohibited to move.
Reference
Page 67 Trigger
Page 68 Auto
Page 69 Repeat auto
Page 71 FIFO trigger
Page 72 FIFO repeat
Page 74 Multi-trigger
Page 76 Multi-repeat