8.6
Precautions
■1. Replacing SLMP compatible device
After replacing an external device or a SLMP compatible device due to failure and so on, the devices may not
communicate by changing the MAC address. (When replaced with a device that has the same IP address)
When a device in the Ethernet network is replaced, restart all devices in the network.
■2. The deviation between MC protocol and SLMP protocol
When using our products used in MC protocol for SLMP protocol, there is a difference between the corresponding
commands. Refer to the following manual and check if they are convertible.
➠
8 - 14
8.6 Precautions
SLMP Reference Manual