2. MICROCOMPUTER CONNECTION (SERIAL)
2.1
Microcomputer Connection (Serial)
The "microcomputer connection (Serial)" is a function by which data can be written or read from a PC, microcomputer
board, PLC, etc. (hereinafter referred to as "host") to virtual devices of the GOT.
Interrupt output is also available from the GOT to the host.
2 - 2
2.1 Microcomputer Connection (Serial)
Virtual devices inside GOT
Write,Read Command
S
T
RW 0100 000A 0163 0362
X
POINT
POINT
POINT
Virtual devices inside the GOT
The devices inside the GOT are used in the microcomputer connection.
(PLC devices are not used)
➠
2.4 Device Data Area
D0
D100
000A
D163
0362
D4095
E
T
D3
X
Microcomputer board
Interrupt
output