Mitsubishi Electric GOT2000 Series Connection Manual page 93

(4) Formats 11 to 13 (Digital Electronics Corporation's memory link method)
This is the same format as the protocol of the Digital Electronics Corporation's memory link method.
Type
Digital Electronics Corporation's memory link method
Format 11
(compatible mode)
Digital Electronics Corporation's memory link method
Format 12
(extended mode, ASCII code 1:1)
Digital Electronics Corporation's memory link method
Format 13
(extended mode, ASCII code 1:n)
(5) Formats 14, 15 (GOT-F900 Series microcomputer connection)
This is the same message format as when a microcomputer connection is established with the GOT-F900 Series.
Type
Format 14 GOT-F900 Series microcomputer connection (format 1)
Format 15 GOT-F900 Series microcomputer connection (format 2)
■2. How to set data format
Set the data format at [Detail setting] in GT Designer3.
For details of the data format setting method, refer to the following.
➠
2.6.1 Setting communication interface (Controller Setting)
Name
This is the basic format of the Digital Electronics
Corporation's memory link method.
This is the appended format of the Digital Electronics
Corporation's memory link method (compatible mode) with
sum check, CR and LF.
This is the appended format of the Digital Electronics
Corporation's memory link method (extended mode, ASCII
code 1:1) with a station No.
Name
Use this format when establishing a 1:1 or m:n connection
between the GOT and the host.
The end code is CR.
Use this format when establishing a 1:1 or m:n connection
between the GOT and the host.
The end code is ETX or sum check.
Description
Description
2.5 Message Formats
Refer to
2
➠
2.5.6
Refer to
➠
2.5.7
2 - 31