Communication Detail Settings - Mitsubishi Electric GOT2000 Series Connection Manual

4.4.2

Communication detail settings

Make the settings according to the usage environment.
Item
Transmission
*1
Speed (BPS)
*1
Station No.
32bit Storage
*1
Input Size (Word)
*1
Output Size (Word)
*1
4 - 6
4.4 GOT Side Settings
Set this item when change the transmission speed used for communication
with the connected equipment. (Default: Auto)
Set the station No. (Default: 1)
Select the steps to store two words (32-bit data). (Default: LH Order)
Set the Input Size. (Default: 32)
Set the Output Size. (Default: 32)
Align the setting with that on the DeviceNet master equipment side.
➠
4.6DeviceNet master equipment Side Settings
POINT POINT POINT
(1) Communication interface setting by the Utility
The communication interface setting can be changed on the Utility's [Communication setting]
after writing [Controller Setting] of project data.
For details on the Utility, refer to the following manual.
➠
GOT2000 Series User's Manual (Utility)
(2) Precedence in communication settings
When settings are made by GT Designer3 or the Utility, the latest setting is effective.
Description Range
125K,
250K,
500K,
Auto
0 to 63
LH Order/HL Order
0 to 128
0 to 128