Setting The Video/Rgb Function - Mitsubishi Electric GOT2000 Series Connection Manual

■1. Settings for the video/RGB equipment
Step 1.
Select [Common]
Step 2.
Set the interface to which the video/RGB equipment is connected.
Step 3.
Check the [Use Video/RGB Input] to set the function. For details on the function setting, refer to the
following manual.
➠ GT Designer3 (GOT2000) Screen Design Manual
Step 4.
Clicking the detail setting button displays the Communication Detail Settings dialog box for each
communication driver.Make the settings according to the usage environment.
➠
15.4.2 Communication detail settings
Click the [OK] button when settings are completed.
15.4.3

Setting the video/RGB function

Set the video/RGB function.
For the video/RGB function setting, refer to the following manual.
➠
GT Designer3 (GOT2000) Screen Design Manual
2.
3.
[Peripheral Setting] [Video/RGB Input] from the menu.
4.
Click!
15.4 GOT Side Settings
15
15 - 9