■2. External I/O device setting
Step 1.
Select [Common]
Step 2.
Set the interface to which the external I/O device is connected.
Step 3.
Check the [Use Operation Panel] to set the operation panel.
For details on the operation panel settings,refer to the following manual.
➠
Click the [OK] button when settings are completed.
10 - 18
10.4 GOT Side Settings
[Peripheral Setting]
GT Designer3 (GOT2000) Screen Design Manual
POINT
POINT
POINT
(1) Communication interface setting by the Utility
The communication interface setting can be changed on the Utility's [Communication setting]
after writing [Controller Setting] of project data.
For details on the Utility, refer to the following manual.
➠
GOT2000 Series User's Manual (Utility)
(2) Precedence in communication settings
When settings are made by GT Designer3 or the Utility, the latest setting is effective.
2.
3.
Click!
[External I/O / Operation Panel] from the menu.