Domain Name Server (Dns) Parameters Configuration - HP Linux workstation x1100 Getting Started Manual

Linux system setup and recovery
configuring your Linux workstation
48
domain name server (DNS) parameters configuration
In the "Boot/Network Parameters" tab, choose the "DNS Parameters" tab
to configure your DNS connections
The window contains two smaller windows DNS Servers (IP Address)
and DNS Search Domains. Below the left window, in the "Server:" box,
type the network Domain Name Server address. Click the Add button
below the small window to place this address in the larger window. If
there is more than one domain name server, you may keep adding
addresses until you have added them all. The first one will be your
primary DNS. Below the right window, in the "Domain:" box, type the
domain name and click the Add button below that window. If there is
more than one, enter them all.
To change or remove an address, click on it to select it, and click on the
Modify or Remove button below it.
Once you have completed setting the functionality for the "Boot/Network
Parameters" tab, you can go to the next tab.
Chapter 2