Viewing Your Workstation Configuration; Configuring Your Workstation - HP x4000 Getting Started Manual

Setting Up And Using Your Workstation
Using Your x4000 Workstation
•
•
•
Viewing Your Workstation Configuration
The Summary screen gives you a summary of the current configuration
of your workstation (BIOS version, CPU type, memory module size, and
installed mass storage devices).
You should check the configuration of your workstation when you first
use it and each time you install, remove, or upgrade accessories.
To check the configuration:
Configuring Your Workstation
The Setup program lets you configure your workstation. You can:
•
•
•
HP recommends you note any changes you make to the system setup for
later reference.
Starting the HP Setup Program
To start the Setup program:
20
This manual downloaded from http://www.manualowl.com
HP Customer Information accesses the HP Customer Information
html page. This page provides links to the HP web site.
Mute and Volume mutes the audio (or restores the audio if it has
been previously muted) and controls the volume level.
Shortcut starts applications, opens documents, or opens URLs on the
Internet. To assign actions to Shortcut keys, press the Menu key and
following the on-screen instructions.
1. Shut down your workstation as described in "Shutting Down Your
Workstation" on page 17.
2. Restart your workstation.
3. When the start-up logo appears on your display, press
you to the Summary Screen. The Summary Screen is displayed for
only a short time.
set up the system Administrator and User passwords
change the system boot order
solve configuration problems
1. Start your workstation. If your workstation is already up, restart it.
. This takes
Esc
Chapter 1