Tech Mode - Henny Penny Evolution Elite EEE-153 Technical Manual

5-5. TECH MODE

409
The TECH Mode has self-diagnostic information, which can be
used by certifi ed technicians for troubleshooting purposes, such
as:
T-1 • Software
T-2 • Fryer Type (Gas or Elec.)
T-3 • Push Button Test
T-4 • All On Display Test
T-5 • Display Segment Test
T-6 • Display Digits Test
T-7 • Display Decimal Point Test
T-8 • LED's Test
T-9 • Left Temp. Probe Calibration & Offset
T-10 • Left Level 1 Probe Calibration & Offset
T-11 • Left Level 2 Probe Calibration & Offset
T-12 • Right Temp. Probe Calibration & Offset
T-13 • Right Level 1 Probe Calibration & Offset
T-14 • Right Level 2 Probe Calibration & Offset
T-15 • CPU Control Temp. Calibration/Offset/Highest
T-16 • View A - D Channel
T-17 • Digital Inputs
T-18 • AIF Info
T-19 • Outputs Test
T-20 • Pumps & Valves Test
T-21 • Recovery Test Limit
T-22 • Drain Light Stay On?
T-23 • Heat Err Enabled?
T-24 • Change Tech Code?
T-25 • Total Initialization
Not all Tech Mode functions are discussed in this section.
To ensure proper operation of fryer, please consult Henny
Penny Corp. before changing any of these settings. For
more information on these functions, contact the Service
Department at 1-800-417- 8405, or 1-937-456-8405.
Model EEE-153, 154
5-12