Friendly Robotics robomower RL350 Service Manual page 92

4. Repair and Maintenance Procedures
The Repair and Maintenance Procedures Section is broadly divided into two areas, External
and Internal. The External procedures include all those procedures that can be completed without
the removal of the cover and conversely all Internal procedures require the removal of the cover
of the unit.
Always follow procedures step by step and ensure good workshop practice by working in
clean, dry conditions. Use only correct, well-maintained tools. At the top of each procedure, the
tools required are listed, as well as the time needed to complete the procedure. The time stated
tends to be generous, allowing time for diagnostics, reviewing the relevant procedures in the
Service Guide and completing the General Test (See section 5.1) before the unit is sent back to
the customer.
Always complete testing to ensure safety and proper operation of the unit. When completing
work, always record the FCS (Friendly Coding System) code on any report or claims to Friendly
Robotics (See section 6 – Procedures and Policies)
4
1