Table of Contents
Advertisement
10.1.3. ENERGIES CONSUMED DISPLAY SCREEN
The
sub-menu displays the meters of energy consumed by the load.
Active energy.
DC energy (only if a DC current
sensor is connected).
Reactive energy.
Distortion energy.
Apparent energy.
NOTE: This screen corresponds to the choice "non-active quantities broken down" in the VAR tab of the Calculation
Methods menu of the Configuration mode. If "non-active quantities not broken down" is selected, Dh (distortion energy)
does not appear and Q1h is replaced by Nh. This non-active energy has no inductive or capacitive effect.
10.1.4. ENERGIES GENERATED DISPLAY SCREEN
The
sub-menu displays the meters of the energy generated by the load.
Active energy.
DC energy (only if a DC current
sensor is connected).
Reactive energy.
Distortion energy.
Apparent energy.
NOTE: This screen corresponds to the choice "non-active quantities broken down" in the VAR tab of the Calculation
Methods menu of the Configuration mode. If "non-active quantities not broken down" is selected, Dh (distortion energy)
does not appear and Q1h is replaced by Nh. This non-active energy has no inductive or capacitive effect.
10.2. FILTERS L1, L2 AND L3
10.2.1. POWERS AND ASSOCIATED QUANTITIES DISPLAY SCREEN
The W... sub-menu displays the powers and associated quantities.
Active power.
Reactive power.
Distortion power.
Apparent power.
DC power.
Figure 10-3
Figure 10-4
Figure 10-5
75
Inductive reactive effect
.
Capacitive reactive effect
Inductive reactive effect
.
Capacitive reactive effect
Power factor (PF).
Fundamental power factor (also
called displacement factor -
DPF).
Tangent of the phase shift.
Phase shift of voltage with
respect to current.
.
.
Advertisement
Table of Contents
