Energy Mode - AEMC PEL 52 User Manual

Power & energy logger

Hide thumbs Also See for PEL 52:

Table of Contents

4.3.2 Energy Mode

This mode displays the energy: active energy (Wh), reactive energy (varh),

apparent energy (VAh).

The energies displayed are the total energies of the source or of the load. The

energy depends on the duration.

Press the  key to switch from one screen to the next. You will scroll

successively:

Ep+: Total active energy consumed (by the load) in Wh

■

Ep-: Total active energy supplied (by the source) in Wh

Eq1: Reactive energy consumed (by the load) in the inductive quadrant

■

(quadrant 1) in varh.

Eq2: Reactive energy supplied (by the source) in the capacitive quadrant

■

(quadrant 2) in varh.

Eq3: Reactive energy supplied (by the source) in the inductive quadrant

■

(quadrant 3) in varh.

■

Eq4: Reactive energy consumed (by the load) in the capacitive quadrant

(quadrant 4) in varh.

Es+: Total apparent energy consumed (by the load) in VAh

■

Es-: Total apparent energy supplied (by the source) in VAh

■

NOTE: The device does not display the "h" symbol. Therefore, you will

see "W" for "Wh".

Power & Energy Logger Model PEL 52 - User Manual

Table of Contents