Table of Contents
Advertisement
Making Measurements
1.
Place the meter in the location to be measured.
2.
If the instrument is OFF, press and hold down the
a few moments the instrument displays the CO
3.
To display temperature and humidity along with CO
The symbol 3D appears on the screen.
4.
To change the temperature units of measure, long-press
continue to use this unit when next turned ON.
ECO (Energy Saving) Mode
ECO mode saves energy when the Model 1510 measures air quality over a long
period. The backlighting and the buzzer are deactivated, and CO
once every 10 minutes. This saves the batteries. In addition, the instrument
automatically activates "sleep" mode between 4:30 p.m. to 8:30 a.m. These times can
be changed using DataView software (see § 3).
1.
Long-press
appears on the display.
2.
Long-press
Recording Measurements
You can start and stop a recording session on the instrument. Recorded data is
stored in the instrument's memory, and can be downloaded and viewed on a
computer running the DataView Data Logger Control Panel.
You can start a manual recording session in any mode except P_REC (Programmed
Recording). After recording is in progress, you cannot change modes.
1.
Long-press REC (>2 seconds) to start a manual recording. The symbol
M_REC appears on the display.
2.
Long-press REC a second time to stop recording.
To schedule recording sessions, and download and view recorded data, see the
DataView Data Logger Control Panel Help.
OPERATION
(>2 seconds) to activate ECO mode. The symbol ECO
a second time to return to normal operation.
measurement.
2
, press the
2
5
button until it turns ON. After
button twice.
. The instrument will
is measured only
2
Advertisement
Table of Contents
