In the PEL Control Panel, go to the Configuration menu
■
Communication tab. Enable DataViewSync™, and enter the password that will
be used to connect afterwards.
3.2.3 Nominal Primary Current
From the Wi-Fi screen, press the ▼ button to access the following screen.
■
Connect the current sensor(s).
■
The current sensor is automatically detected by the device.
■
■
If two current sensors are connected, they must be identical.
For AmpFlex
or MiniFlex
■
®
26
Figure 15
Figure 16
sensors, press the
®
Power & Energy Logger Model PEL 52 - User Manual
button to select 300 A or 3000 A.
and then the