Settings For Tool Lists - Siemens SINUMERIK 840D SL Operating Manual

13.15

Settings for tool lists

The "Settings" window provides the following options to set the view in the tool lists:
● Display only one magazine in the magazine sorting
● Display only spindles in the buffer
● Activating the adapter-transformed view
References
Further information about configuring the settings are shown in the following reference:
SINUMERIK Operate (IM9) / SINUMERIK 840D sl Commissioning Manual
Milling
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
– You limit the display to one magazine. The magazine is displayed with the assigned
buffer locations and the not-loaded tools.
– You use a configuration to specify whether the "Magazine selection" softkey jumps to
the next magazine or whether the "Magazine Selection" dialog for changing switches
to any magazine.
In order to display during operation only the spindle location, the remaining locations of
the buffer will be hidden.
– The geometry lengths and the operation offsets are displayed transformed in the tool
list.
– The wear lengths and the sum offsets are displayed transformed in the tool wear list.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Tool management
13.15 Settings for tool lists
567