Tool management
13.11 Filtering the tool management lists
13.11
Filtering the tool management lists
The filter function allows you to filter-out tools with specific properties in the tool
management lists.
For instance, you have the option of displaying tools during machining that have already
reached the prewarning limit in order to prepare the corresponding tools to be loaded.
Filter criteria
● Only display the first cutting edge
● Only tools that are ready to use
● Only tools that have reached the prewarning limit
● Only locked tools
● Only tools with active code
Note
Multiple selection
You have the option of selecting several criteria. You will receive an appropriate message if
conflicting filter options are selected.
Procedure
...
562
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
Select the "Parameter" operating area.
2.
Press the "Tool list", "Tool wear" or "Magazine" softkey.
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
Milling