Siemens SINUMERIK 840D SL Operating Manual page 238

Creating a ShopMill program
7.1 Program views
Parameter screen with help display
Figure 7-3
The animated help displays are always displayed with the correct orientation to the selected
coordinate system. The parameters are dynamically displayed in the graphic. The selected
parameter is displayed highlighted in the graphic.
The color symbols
Red arrow = tool traverses in rapid traverse
Green arrow = tool moves with the machining feedrate
238
Press the <Cursor right> key to open a selected program block or
cycle in the machining schedule.
The associated parameter screen with help screen is then
displayed.
Parameter screen with help display
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
Milling