Setting The Multi-Channel View - Siemens SINUMERIK 840D SL Operating Manual

Multi-channel view

9.4 Setting the multi-channel view

Note
2-channel display
Unlike the smaller operator panels, the T,F,S window is visible for a 2-channel view in the
"Machine" operating area.
Program operating area
You can display as many as ten programs next to each other in the editor.
Displaying a program
You can define the width of the program in the Editor window using the settings in the editor.
This means that you can distribute programs evenly - or you can widen the column with the
active program .
Channel status
When required, channel messages are displayed in the status display.
9.4 Setting the multi-channel view
Setting
View
Channel selection and
sequence
(for "2 - 4 channels"
view)
Visible
(for "2 - 4 channels"
view)
490
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Meaning
Here, you specify how many channels are displayed.
1 channel
•
2 channels
•
3 channels
•
4 channels
•
You specify which channels in which sequence are displayed in the multi-
channel view.
Here, you specify which channels are displayed in the multi-channel view.
You can quickly hide channels from the view.
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
Milling