Siemens SINUMERIK 840D SL Operating Manual page 564

Tool management
13.12 Specific search in the tool management lists
Procedure
...
...
564
1. Select the "Parameter" operating area.
2. Press the "Tool list", "Tool wear" or "Magazine" softkey.
3. Press the ">>" and "Search" softkeys.
4. Press the "Tool" softkey if you wish to search for a specific tool.
- OR -
Press the "Magazine location" softkey if you wish to search for a
specific magazine location or a specific magazine.
- OR -
Press the "Empty location" softkey if you wish to search for a specific
empty location.
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
Milling