Siemens SINUMERIK 840D SL Operating Manual page 551

Icons in the wear list
Icon/
Marking
Tool type
Red "X"
Yellow triangle pointing
downward
Yellow triangle pointing
upward
Green border
Magazine/location number
Green double arrow
Gray double arrow
(configurable)
Red "X"
Procedure
See also
Displaying tool details (Page 565)
Changing a tool type (Page 566)
Milling
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
1. Select the "Parameter" operating area.
2. Press the "Tool wear" softkey.
Meaning
The tool is disabled.
The prewarning limit has been reached.
The tool is in a special state.
Place the cursor on the marked tool. A tooltip provides a
short description.
The tool is preselected.
The magazine location is positioned at the change position.
The magazine location is positioned at the loading position.
The magazine location is disabled.
Tool management
13.6 Tool wear
551