Grooving Residual Material (Cycle952) - Siemens SINUMERIK 840D SL Operating Manual

Parameter Description
with limited machining area only, yes:
XA
XB
ZA
ZB
N Number of grooves
DP Distance between grooves (inc)
* Unit of feedrate as programmed before the cycle call
8.5.10

Grooving residual material (CYCLE952)

Function
The "Grooving residual material" function is used when you want to machine the material
that remained after grooving along the contour.
For a G code program, first select the "Grooving residual material" function. Material that
remains as part of the finishing allowance is not residual material. The "Grooving residual
material" function allows you to remove unwanted material with a suitable tool.
The "Grooving residual material" function is a software option.
Procedure
Milling
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
1. Limit XA ∅
2. Limit XB ∅ (abs) or 2nd limit referred to XA (inc)
1. Limit ZA
2. Limit ZB (abs) or 2nd limit referred to ZA (inc)
1. The part program to be executed has been created and you are in the
editor.
2. Press the "Turning" and "Contour turning" softkeys.
3. Press the "Grooving residual material" softkey.
The "Grooving residual material" input window is opened.
Programming technological functions (cycles)
8.5 Contour turning - only for G code programs
Unit
mm
mm
441