12.5.3
Straight and circular machining
12.5.3.1
Straight milling
Use this function for simple, straight machining (e.g. face or longitudinal turning).
Procedure
Parameter
F
X
Z
Y
B
Milling
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
1.
"Manual Machine" is active.
2.
Press the "Straight Circle" softkey.
3.
Select the desired straight machining and press the "Straight all axes"
softkey
- OR -
Press the "Straight X α" softkey.
- OR -
Press the "Straight X α" softkey.
4.
Specify the desired value for the feedrate F.
- OR -
Press the "Rapid traverse" softkey.
The rapid traverse is displayed in field "F".
5.
Enter the target position and, if required, the angle (α) for the axis or
axes to be traversed.
Using the "Graphic view" softkey, you can toggle between the help
screen and the graphic view in the screen.
Description
Feedrate
Straight all axes
Target position in the X direction (abs or inc)
Target position in the Z direction (abs or inc)
Target position in the Y direction (abs or inc)
Target position of the B axis (abs or inc)
Working with Manual Machine
12.5 Simple workpiece machining
Unit
mm/min
mm/rev
mm
mm
mm
mm
519