Multi-channel view
9.1
Multi-channel view
The multi-channel view allows you to simultaneously view several channels in the following
operating areas:
● "Machine" operating area
● "Program" operating area
See also
Editor settings (Page 175)
9.2
Multi-channel view in the "Machine" operating area
With a multi-channel machine, you have the option of simultaneously monitoring and
influencing the execution of several programs.
Displaying the channels in the "Machine" operating area
In the "Machine" operating area, you can display 2 - 4 channels simultaneously.
Using the appropriate settings, you can define the sequence in which channels are
displayed. Here, you can also select if you wish to hide a channel.
Note
The "REF POINT" operating mode is shown only in the single-channel view.
Milling
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
Machine manufacturer
Please refer to the machine manufacturer's specifications.
9
485